Jump to content
Sign in to follow this  
Followers 0
WHEEL HORSE BILL

Need a wiring harness and switches

By WHEEL HORSE BILL, in Wheel Horse Tractors

Recommended Posts

WHEEL HORSE BILL    7

WHEEL HORSE BILL
Posted

Hi guys I need a wiring harness for a c-101 with a pto switch .Anyone out there got one and how much.

Share this post

Link to post
Share on other sites
 

Kelly    1,029

Kelly
Posted

No harness but I have new PTO switches send me a PM

Share this post

Link to post
Share on other sites
 

JohnnyO    9

JohnnyO
Posted

Johnny O here...I really need a good PTO Switch for my C-101.  The old one (possibly not original (??) ...sat on a small bar, which was "tacked" to the frame, with each end of the bar up, at a right angle with two small tabs on each one, that "slipped into the side" of the pto switch that had a slot to hold those tabs, on each side of the switch, keeping it seated tight so it would make contact with the pto when engaging, or disengaging, to make contact with the plug. The holding "piece" i've described had all but rotted away, and there's no way to hold the pto swith down tight, to make contact. When you engage it, it lifts the switch "UP"...so there's no function. I've seen some others that the switch was attached to a small three inch bar, that was bolted or screwed to the fram on each end of the bar, the switch has a 3/8" hole for the contact button to hit the spring underneath. That WOULD work for me. Can you or anyone help me find a PTO Switch that will work on my C-101 8 speed (1978-79) ? I have tried many places, for used..as a new one is about $150.00 and cannot afford it. Thanks if anyone has any direction for me to look for or find one? Thanks.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • t_furl43
      1979 C-101
      By t_furl43
      1979 c-101 nice project tractor just needs a few odds and ends, steering wheel, coil, carburetor bowl, the wiring was redone by previous owner....all 4 tires are good and hold air it goes into all gears no problem, transmission fluid has been changed, 10hp Kohler, message me or call or txt with any questions, it does run and runs well,  it’s been kept inside since I’ve had it, I would also trade for a mid mount grader blade thanks 




      92DB561C-FF95-4868-A52B-5725D4D3B9DE.mp4
    • Wayne Clark
      Wheel Horse C-101
      By Wayne Clark
      I have restored a C-101. 10 HP Kohler - 8 speed - cast iron transmission with 36" deck.
      Any ideas what I could sell it for.  Thanks.  Located in  Imperial, MO.




    • jellyghost
      New Owner, Sudden Problem!
      By jellyghost
      I am the proud new owner of a 1978 C-101.  I bought it yesterday, and it is in amazing condition.  Everything worked except the brake peddle and under chair safety cutoff.
      I started mowing today, and everything was going great.  As it got late, I started using the lights.  
      Suddenly, the mower stopped in the middle of a mow.
       
      Here are the facts that seemed relevant to me:
      The motor won't try to turn on when I turn the key.
      The lights and the electrical won't turn on with the key and switch.
      It has a new tank of gas and fresh oil.
      I inspected the wires, and they look ok at first glance.
      The WH has a car battery dated from April 2011.
       
      I do not have a black thumb.  I am basically ignorant, but it seems like an electrical issue to me.  Could the battery have completely died even while running?  What do you guys think?  I was hoping to do a post showing this awesome mower, but this happened before I could!
    • Pullstart
      My daughter didn't know I was watching her
      By Pullstart
      Jada decided she wants do drive the wheelhorses because her battery on the simplicity was dead.  She can just reach the clutch pedals and I kept both the 502 and C-101 in low range so no matter what gear she selected it was still slow enough.  I've created another monster!
       
      click for short videos...
       

       

    • Pullstart
      Picked up a C-101 this morning!
      By Pullstart
      So my mom gave us kids cash for Christmas and told us to go find something for ourselves, I took a little 50 some mile road trip this morning and picked up a steel fender C-101.  Overall, it seems to be well taken care of and in great shape!  Except for the connecting rod issue that I knew about before heading to get it.  I have a spare 10 horse that had the carb and starter bits robbed from it before I picked up my 8 speed donor for the 502 so I should be able to use the left overs to get this back running.  Came with a RD deck and a big folder full of service records and receipts.  All in all, this will be a worker and should give me the ability to refresh my 502 without the worry of  downtime!
×
×
  • Create New...