Mr. 856 170 #1 Posted February 24, 2014 I need a throttle clip part #1277 according to the manual. I believe this is now crossing to Toro part #324-325. Not one site shows a picture of this silly little piece that is likely to cost me more then id like to pay but it is what it is. Can anyone confirm that the 324-325 is the part I need before I pull the trigger? it is the clip that holds the throttle cable to the throttle bracket on a Kohler K181S in a 856. 1 Share this post Link to post Share on other sites
rmaynard 15,417 #2 Posted February 24, 2014 Yes, that is the new number. It should cost you about $2.00 plus shipping. http://www.propartsdirect.net/pages/ECommerce/ViewCart?returnUrl=http%3A%2F%2Fwww.propartsdirect.net%2Fp%2FToro-Lawnmower-Parts%3Faribrand%3DTO%23%2Fs%2FTO%2F%2F324-325%2F1 Share this post Link to post Share on other sites
Mr. 856 170 #3 Posted February 25, 2014 man you are good! thanks for saving my butt again. Share this post Link to post Share on other sites
Mr. 856 170 #4 Posted March 20, 2014 well after THREE WEEKS of patiently waiting for my throttle clip to arrive I get home from Maine(Vacation for a few days) run to the mail box and open the package and find an owners manual for a model 1077 and 1277 and hand written on the top I see the number 324-325. My first problem is why the hell don't the sites put pictures up and what the hell am I supposed to think when the part description is "1x1277 WH 1967 tractor"..........for the love of god can anyone tell me where I can find the right parts? I need the throttle cable clip part #1277 according to manual. I DONT NEED A MANUAL FOR A MODEL 1277. I have waisted three weeks waiting on the wrong thing to arrive. Hey maynard.........had I followed your recommendation I would have ended up with the same owners manual. DOHHHH!!!! Share this post Link to post Share on other sites
Mr. 856 170 #5 Posted March 20, 2014 Did I mention I hate buying off the internet. This seems to happen more times then not. Are there any dealers in the northern CT area that might have this throttle cable clip??? Im dead in the water without it. Share this post Link to post Share on other sites
KATO 115 #6 Posted March 20, 2014 Not sure exactly what clip your talkin about but if its what I think it is it wouldn't be hard to make from aluminum flat bar by drillin a couple holes and slitting it with a hack saw. Share this post Link to post Share on other sites
TT-(Moderator) 1,131 #7 Posted March 20, 2014 Should be Kohler p/n 210149 These are cheaper though: http://www.mfgsupply.com/mower/mowerthrottle/mowerthrottleu/3-249.html 1 Share this post Link to post Share on other sites
Martin 2,131 #8 Posted March 20, 2014 (edited) i just replied to your other post...... not what TT came up with but an alternative. the bolt hole size might be a little larger. and not as cheap as TTs link either...... Edited March 20, 2014 by Martin Share this post Link to post Share on other sites
Mr. 856 170 #9 Posted March 21, 2014 Yes that is what im looking for!! Thanks TT and martin. 1 Share this post Link to post Share on other sites
