rear weight bracket pics

[876wheelhorse 46]

anyone use or make a rear weight bracket? i would like to make something to hold a few suitcase weights off back of tractor. something for some extra weight

[Lane Ranger 10,852]

Some guys have fabbed up a 3/4 or one inch rod on a frame that attached to the rear that just hold  the round lift weights with a hole in the center.    They weld the round rod at and angle so the weights can ride without sliding off.  Seems to work well on the tractors I have seen.   The frame fab just depends on the tractor you have.  

Edited February 17, 2014 by Lane Ranger

[gwest_ca-(File Mod) 10,920]

There is a rear weight frame in the Bervac snowthrower manual

 

Garry

 

[rokon 64]

^{I think the easiest way to do it is to get one of the super duty receiver hitches that tom is currently selling and then use the heavy hitch suitcase bracket to hang the weights off of.}

^{https://heavyhitch.com/store/heavy-hitch-accessories/suitcase-weight-bracket-for-receiver-hitch/}

[Tim 97]

you could do something like this

 

cut the end off a Reese trailer ball mount and butt welded a piece of flat stock with a couple of end caps to it

works great

also have the bervac weight frame- this is much more convenient

 

[sorekiwi 761]

This is one built to hold weights from a workout machine

 

 

[rexman72 210]

those are great ideas for  rear weight

[Tim 97]

mike, did you cut up a plow frame to make yours?

[sorekiwi 761]

mike, did you cut up a plow frame to make yours?

 

Yup, that was a badly repaired plow frame that I had acquired. 

 

It clips into the rear plow bracket (the wrong way around), and is held level by two straps that attach to the top straps of the plow bracket.

 

Obviously it wont work with a plow, I use this with my blower.