418-8

[dhammer 2]

Restoring my 1987 418-8 Wheel Horse.  Completely disassembled and starting back up with it now. Remembering where almost everything goes but I am having a few problems with a few item placements.  Is there any kind of assembly guide that would have pictures to show exact placement of all parts (ex: wire routing and bosch relay and pto spring placement).

I already have the Toro parts manual but that does not show the placement of the parts on the tractor.  Thanks for any help

[daveoman1966 3,766]

Here is the schematic of the 418-8 1987 PTO clutch.   There are also schematics of wiring harness, but don't know if it'll suit your need.

http://milacalawn.com/pages/oemparts?aribrand=TO#/Toro_Consumer/31-18K801%2c_418-8_Garden_Tractor%2c_1987/PTO_CLUTCH_AND_CONTROL/31-18K801-2545-1987/810480R1-80R10058-00026

[dhammer 2]

I have that schematic and have also used that website. The site shows the parts but does not show how the spring is mounted to the tractor with regards to location. A photograph would show what I need to see too.

[Lane Ranger 11,060]

There some photos in the gallery and if you do a search on Red Square you may get a 418-8 photo you can use to determine the spring setup.

[Tankman 3,520]

Try Parts Tree, excellent diagrams.

 

http://www.partstree.com/parts/?lc=Toro+Consumer&mn=31-16K801

 

The link'll take you to the 416. Use your Horse numbers in the search.

[n1defan 47]

[AMC RULES 37,144]

 

                         

[Martin 2,133]

in hindsight, you will remember to take pics before disassembly next time?

 

most of the mechanical items placement is very similar from model to model. asking lots of questions or searching for pics is going to be your only option here.

 

i have a few 3,4,500 series tractors and will help with whatever i can, fire away and see what we can do. the pto spring placement is similar over a bunch of tractors, its probably inside the hood stand. look for a hole in the actuating arm for the cotter pin.. if you need a pic of where the other end of the spring hooks to i will try and get one today. 

 

google is going to be your friend here too......

 

 

Edited February 8, 2014 by Martin

[chazm 413]

Is this what your looking for  ??

 

Edited February 8, 2014 by chazm

[dhammer 2]

Thanks for all your replies. Chazm, that is the picture that shows it all. Thanks for the pic.

[rexman72 210]

if you can post pics as we like them

[darg 7]

I have a 418 A, do not know if I can help or not , because mine has a 12 HP Mag in it.

darg