redsquarebob 27 #1 Posted February 6, 2014 commando800 is out of gear and the wheels will not turn just got the tractor today Share this post Link to post Share on other sites
TT-(Moderator) 1,145 #2 Posted February 6, 2014 Might be froze up. Get some heat around the transaxle and see what happens. Share this post Link to post Share on other sites
redsquarebob 27 #3 Posted February 6, 2014 that was what i was thinking thanks for reply Share this post Link to post Share on other sites
Ed Kennell 38,715 #4 Posted February 7, 2014 What does the oil look like ?? Share this post Link to post Share on other sites
clayfrick 0 #5 Posted February 16, 2014 (edited) I have a model 1067,currently there is just a straight 3speed trans that goes for a few feet and locks up,what could be wrong and does anyone know where i can printoff a repair sectin for that tranny,I would like to rebuild it.also I would like to find the 6 speed tranny that belongs in it,does anyone have one for sale or at least have the correct model number for that tranny,the tractor once again is a 1967 model 1067ph0ne me at 715 921 0049 or e-mail me at clayfrick1@gmail.com,any informatin would be very appreciated,I also need a hood for a c-120 and the lift arm Edited February 16, 2014 by clayfrick Share this post Link to post Share on other sites
rmaynard 15,620 #6 Posted February 16, 2014 (edited) Sounds like maybe a frozen transmission as described above. You can download the Uni-drive manual from the "manuals" section of this forum. Put your request for the transmission, hood and arm in the "wanted" section for best results. Edited February 16, 2014 by rmaynard Share this post Link to post Share on other sites
