Does any one know about work horse's

[rj24 38]

i have a 84 work horse by wheel horse GT 1800 auto and i cant find any info on it i do know that it was a demo trater and it never had a deck on it all it has on it is a plow. and where can i get a deck for it at. here is the video i mad on it

 

http://www.youtube.com/watch?v=k_CgRxS5ntA

 

hop i can get so info on the thank it will be nice to know and what wheel horse will interchange with this one dose any one knows the selling $

[varosd 1,185]

The GT1800 is a Garden Tractor and except for the Briggs motor, it is the same as a 400 series and all attatchments will fit. 

[AMC RULES 37,126]

I know they don't turn up often. 

    

Edited January 28, 2014 by AMC RULES

[chazm 413]

WELCOME TO 

Good starter tractor  ...  Looks like she could use a good bath & some TLC

Good  luck with your

[KC9KAS 4,741]

[oaktown1987 82]

I have a workhorse 1142 put a k241 on it good tractor in pieces at moment

Sent from my iPhone using Tapatalk

[rj24 38]

so this workhorse is a hard to fine any more or is it that its not a coming tractor to get like the wheel horse are

[AMC RULES 37,126]

There's some good info on them here...

[Racinbob 11,035]

As varosd said, same as a 400 but with a B&S and 1" axles but that's no biggie. Same attachments. I bought a GT1100 in 1985 brand new for $800. It had a 11hp B&S and I figured I'd just replace the B&S with a Kohler when it broke but it never did.....even after submerging it in a pond one winter when the ice broke. I had plenty of attachments for my other Wheel Horses that fit and that GT1100 was a great machine.

[varosd 1,185]

As varosd said, same as a 400 but with a B&S and 1" axles but that's no biggie. Same attachments. I bought a GT1100 in 1985 brand new for $800. It had a 11hp B&S and I figured I'd just replace the B&S with a Kohler when it broke but it never did.....even after submerging it in a pond one winter when the ice broke. I had plenty of attachments for my other Wheel Horses that fit and that GT1100 was a great machine.

Actually its a 1 1/8" axle same as my 1988 520-H, same Eaton 1100 tranny, hubs are part # 105763-03

[Sparky-(Admin) 21,300]

so this workhorse is a hard to fine any more or is it that its not a coming tractor to get like the wheel horse are

The Work Horse series was only available for two years (1983-1984) and I dont think they were a big seller compared to the same machine with a Kohler under the hood. So that makes them a bit harder to come by than a 300 or 400 series machine. But dont be fooled into thinking that harder to find equals worth more money, thay actually sell for less than a comparable machine with a Kohler.

  I have a GT-1600 (originally a Briggs 16 twin) thats been re-powered with a Kohler magnum 10.

Mike.............

[Racinbob 11,035]

Thank's for correcting me. That's all the better for you rj24. Were all the hydros 1 1/8"?

[varosd 1,185]

And after getting my Work horse running, EricJ noted that the Eaton 1100 in the Work Horses had the Toro Consumer 108320
GEAR 22T DRIVE just like the later 520-HC.  My 1988 520-H has the 20 T gear.   The Work horse is a lot faster!!

 

Rj24: clean her up, change all the fluids and filters and you should have nice rig.

 

 

[gwest_ca-(File Mod) 11,029]

GT-1800 Auto operator manual

 

Garry

[rj24 38]

what tip of tray oil do i get for here it littol low but not to much

[Sparky-(Admin) 21,300]

what tip of tray oil do i get for here it littol low but not to much

Do you mean transmission oil? If so it should use 10w-30 or 10w-40. When you pull the dipstick and you should see clean motor oil, not automatic transmission fluid.

Mike.......

[rj24 38]

i was told by toro it was universal hydro and tranny oil it has 10w-30 with a additive in it and i cant fin it here

[rj24 38]

is it a good thank that my workhorse can lift and plow with a JD blad on it it ways a bot 135 and what make it so power full to push 2 feet of wet snow and dose not get stuck or spin out my best freind has a wheel horse D or B 80 and it cant do it 

will this work for my work horse

Edited January 29, 2014 by rj24

[Sparky-(Admin) 21,300]

That was a 60" deck and its for the 520's with forward swept front axles, so no, it wont work with your GT-1800. Biggest you can use is a 48" attach-a-matic era deck. Thats means a deck built from 1973 to present.

Mike...........

 

PS...Craigslist links are not allowed here. Had to delete.

[rj24 38]

so  can you show me on that will work

[gwest_ca-(File Mod) 11,029]

Here are the manuals for the 48" deck sold in 1984 for the GT-1800 Twin. There are other decks that will fit. Gives you an idea of what's required.

 

This 42" rear discharge deck will also fit

 

Garry

[rj24 38]

whats the max lifting power it can do and whats the max powing power it hasi want to make a grader blade for it so i can fix my rod and the lifting power for a new snow blad

[Wheel Horse Kid 105]

Welcome to RedSquare! Don't see too many work horses around here at all...

[rj24 38]

dose any one know where i can get the head light buckets at for my gt 1800

[Martin 2,131]

Still available new from toro,

109494 and 109495

Sent from my iPhone using Tapatalk

Edited January 30, 2014 by Martin