Desko 608 #1 Posted January 10, 2014 Hello. I was wondering is there an oil seal on the input shaft of an 8 speed transaxle because I can't seem to find or see one on mine only the needle bearing it doesn't leak a lot barely noticeable or maybe I just have it over filled. I was just wondering if it has one or not so I know if I have to order one or not Share this post Link to post Share on other sites
rmaynard 15,419 #2 Posted January 10, 2014 Yes. The 8 speed should have a 5/8" input shaft with a Toro #100442 or generic CR 6105 seal. 1 Share this post Link to post Share on other sites
Desko 608 #3 Posted January 10, 2014 Alright thanks again that explains the leak Share this post Link to post Share on other sites
oldlineman 1,481 #4 Posted January 13, 2014 (edited) Thank you will post a new post Edited January 13, 2014 by oldlineman Share this post Link to post Share on other sites
Desko 608 #5 Posted January 15, 2014 So if you haven't seen the other thread I tore into the granny for broken reasons upon further inspection mine no longer has the input shaft seal. Great Share this post Link to post Share on other sites
