redrooster 83 #1 Posted December 9, 2013 (edited) Hello fellow WH enthusiasts! I have finally decided to refurbish my C 141. Seems like a big project but I want to do a frame off restoration and I'm looking for a good supplier of parts. Looks like everybody here is very good about helping. Looking forward to getting started and being a part of this great forum. I live near Anderson Indiana. Sent from my SPH-L710 using Tapatalk Edited December 10, 2013 by redrooster 3 Share this post Link to post Share on other sites
varosd 1,185 #3 Posted December 9, 2013 :text-welcomeconfetti: :wh: Share this post Link to post Share on other sites
groundhog47 347 #4 Posted December 10, 2013 Ditto the fellow members above!!! Share this post Link to post Share on other sites
nylyon-(Admin) 7,291 #5 Posted December 10, 2013 Welcome. I am certain you can find just about everything you will need from decals, knobs to screws and other parts, check our vendor area. You can alway start a new thread in the Wanted area as well. Share this post Link to post Share on other sites
redrooster 83 #6 Posted December 10, 2013 Were is the vendor section? Also I haven't figured out how to post pics. Share this post Link to post Share on other sites
953 nut 55,290 #8 Posted December 10, 2013 To post a picture use the More Reply Options, lower right corner, click on it then click on attach and put in your photo. Yes Share this post Link to post Share on other sites
Sparky-(Admin) 21,323 #9 Posted December 10, 2013 Mike................ Share this post Link to post Share on other sites
CasualObserver 3,408 #10 Posted December 10, 2013 :wrs: Via Tapatalk 4 Share this post Link to post Share on other sites
Coadster32 793 #11 Posted December 10, 2013 Welcome to Glad to hear you're jumping right in. No better way to learn about them for sure. Share this post Link to post Share on other sites
redrooster 83 #12 Posted December 10, 2013 Pics Sent from my SPH-L710 using Tapatalk [quote name="redrooster" post="405001" timestamp="138669272 Sent from my SPH-L710 using Tapatalk Share this post Link to post Share on other sites
redrooster 83 #13 Posted December 10, 2013 I made a rollaround stand to elevate my WH. Next I'm making a temporary paint booth to contain all the overspray. Sent from my SPH-L710 using Tapatalk 1 Share this post Link to post Share on other sites
JC 1965 1,530 #14 Posted December 10, 2013 Hello and Good luck with your restoration. You should be able to find all the help you need here on Share this post Link to post Share on other sites
groundhog47 347 #15 Posted December 10, 2013 (edited) Were is the vendor section? Also I haven't figured out how to post pics. If you've not yet found it, Vendors are listed in /on main page under forums, under other sections near bottom of page. Also good lookin' project and like your roll around "holding gate/pen" We usta use a chute/gate to dehorn cows, that one is much better, Ha! Edited December 10, 2013 by groundhog47 Share this post Link to post Share on other sites
redrooster 83 #16 Posted December 11, 2013 What fourm is best for posting pictures and progress of your WH restro? I'm making a temporary paint booth before I get started. Sent from my SPH-L710 using Tapatalk Share this post Link to post Share on other sites
redrooster 83 #17 Posted December 11, 2013 Paint booth. After I cover it with plastic ill be ready. Sent from my SPH-L710 using Tapatalk 2 Share this post Link to post Share on other sites
AMC RULES 37,130 #18 Posted December 12, 2013 I'm digging that dolly idea. Share this post Link to post Share on other sites
redrooster 83 #19 Posted December 13, 2013 Tried to come up with something that would raise it to a convenient height and be out of the way for good access. To get it on the dolly I drove it down the loading ramps. Sent from my SPH-L710 using Tapatalk 1 Share this post Link to post Share on other sites
neil 2,409 #20 Posted December 13, 2013 Good luck with the restoration . what is your intended use for it when its done ? Share this post Link to post Share on other sites
Amanda 81 #21 Posted December 16, 2013 Welcome to Redsquare Share this post Link to post Share on other sites
redrooster 83 #22 Posted December 17, 2013 Thanks for the welcomes and the useful info that has got this project moving!! Sent from my SPH-L710 using Tapatalk Share this post Link to post Share on other sites
SCOOBY 312-h 14 #23 Posted December 18, 2013 welcome to redsquare. nice wheelhorse you have there, should make a nice restoration. i am the parts manager at a wheelhorse dealer so if ya need anything i might be able to get stuff for ya, we do ups parts so if ya need anything let me know. Share this post Link to post Share on other sites
