JERSEYHAWG / Glenn 4,498 #126 Posted January 5, 2014 Used this cub last winter, sold it because my drive was too small. I do it faster with the 42"on the 416-8 than with the 54" on the big cub. This year the 416 is in process of donating its onan p216 and steering to swap onto a 520h I got with a shot engine. Since we got 5" this week and expecting 8-12" this weekend I've got the 42" blade on my 90 520h. I don't have a plow extension, so if I can't angle to the right because the blade hits the tire. If I angle left out doesn't rub the tire, but it's so close it pulled my roller chain off. Either way, the tractor is wider than the blade when it's angled. Here's a shot of the 416-8 with the blower from last year... Sent from my DROID RAZR using Tapatalk Used this cub last winter, sold it because my drive was too small. I do it faster with the 42"on the 416-8 than with the 54" on the big cub. This year the 416 is in process of donating its onan p216 and steering to swap onto a 520h I got with a shot engine. Since we got 5" this week and expecting 8-12" this weekend I've got the 42" blade on my 90 520h. I don't have a plow extension, so if I can't angle to the right because the blade hits the tire. If I angle left out doesn't rub the tire, but it's so close it pulled my roller chain off. Either way, the tractor is wider than the blade when it's angled. Here's a shot of the 416-8 with the blower from last year... Sent from my DROID RAZR using Tapatalk That's the same setup I have.. I think it's great. But I don't have chains and weights. Till this Moday. Another story. Can I ask why you have the drift cutters off the snow thrower ? Thanks for sharing. Like the old cub to. Glenn Share this post Link to post Share on other sites
decksetter 50 #127 Posted January 5, 2014 (edited) Can I ask why you have the drift cutters off the snow thrower ? Thanks for sharing. Like the old cub to. Glenn Actually the blower didn't have the side wings when I got it a couple years ago. It doesn't work very well on my gravel drive anyway so I never bothered to make any for it. I usually just use the blade instead. Sent from my DROID RAZR using Tapatalk Edited January 5, 2014 by decksetter Share this post Link to post Share on other sites
TravelinJavelin 620 #128 Posted January 5, 2014 this is what I'm using! 4 Share this post Link to post Share on other sites
posifour11 723 #129 Posted January 5, 2014 Dangit..... OK. I'll take a picture of my frankentractor tomorrow if I get snow to plow. They say I will.... 1 Share this post Link to post Share on other sites
squonk 41,942 #130 Posted January 5, 2014 Wish I had a better video. Tough to run a hydro, blower,lift and camera all at the same time. Marvin died right after I shot this. Had to push it into the shop. New fuel pump coming in a few days. http://www.youtube.com/watch?v=rmQH_wAsnGQ 1 Share this post Link to post Share on other sites
RMCIII 838 #131 Posted January 5, 2014 Squonk...sorry to hear about Marvin.... I really like the resto job you did with him... resurrection time, maybe you should rename him Lazarus>> Travlinjavilin.....nice set ups///// Any videos would be AWESOME!!! Share this post Link to post Share on other sites
TravelinJavelin 620 #132 Posted January 5, 2014 yeah I know I still haven't got one yet I'm going thave too though and thank you on the set up still going to have to get chains though 1 Share this post Link to post Share on other sites
Cutlas3391 776 #133 Posted January 6, 2014 You guys you get a lot of snow? Well I have a lake effect snow warning for south of buffalo,ny where I live between Monday night and Wednesday morning suppose to get a little of 3 feet of snow!!! The crazy part of the storm by Wednesday afternoon all the roads will be plow to drive around town just to show you we move snow fast here in western,new York.... Share this post Link to post Share on other sites
TravelinJavelin 620 #134 Posted January 6, 2014 that's all right you guys can keep it over there LOL! 1 Share this post Link to post Share on other sites
RMCIII 838 #135 Posted January 6, 2014 Cutlas....hmmmm, seems like that would make a great video???????? 1 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,498 #136 Posted January 6, 2014 You guys you get a lot of snow? Well I have a lake effect snow warning for south of buffalo,ny where I live between Monday night and Wednesday morning suppose to get a little of 3 feet of snow!!! The crazy part of the storm by Wednesday afternoon all the roads will be plow to drive around town just to show you we move snow fast here in western,new York.... I know that, I have a close buddy moved to Rochester, we stay in touch a few times per week. winter comes early, long and hard and stays late. Be wheel horse prepared. Glenn 1 Share this post Link to post Share on other sites
papaglide 542 #137 Posted January 6, 2014 You guys you get a lot of snow? Well I have a lake effect snow warning for south of buffalo,ny where I live between Monday night and Wednesday morning suppose to get a little of 3 feet of snow!!! The crazy part of the storm by Wednesday afternoon all the roads will be plow to drive around town just to show you we move snow fast here in western,new York.... Right on bro! Front end loaders bite a lot of snow! Right now, I am so happy that me and the family moved about 30 miles north of you. Only Up to 2 inches of the stuff up here. 1 Share this post Link to post Share on other sites
Cutlas3391 776 #138 Posted January 6, 2014 Now we have blizzard warnings!! The wind sounds like thunder. Lake effect snow is evil! I'll post pictures tommorow 1 Share this post Link to post Share on other sites
userj8670 68 #139 Posted January 7, 2014 Now we have blizzard warnings!! The wind sounds like thunder. Lake effect snow is evil! I'll post pictures tommorow I hear it's coming down pretty crazy out there but here in Lewiston I have yet to see a flake! I hope we get some snow - the Kohler needs a workout 1 Share this post Link to post Share on other sites
Hodge71 664 #140 Posted January 7, 2014 Heres a vid of the Charger 12 working her ass off last Friday in 11 below zero and 8 inches of snow…driveway is close to 1/2 mile long… 2 Share this post Link to post Share on other sites
Olratlr 25 #141 Posted January 7, 2014 What will you be using this winter to clear the snow? 3 Share this post Link to post Share on other sites
TT-(Moderator) 1,145 #142 Posted January 7, 2014 What will you be using this winter to clear the snow? A guy about a mile away from where I work has a Trackster almost identical to yours. He had it out playing in the snow the other week. 1 Share this post Link to post Share on other sites
RMCIII 838 #143 Posted January 7, 2014 What will you be using this winter to clear the snow? Ok, now that is just plain OUTSTANDING>... Got a cab for it with a heater? Share this post Link to post Share on other sites
Olratlr 25 #144 Posted January 7, 2014 I just got through making all of the attachment for it only purchased the blade raise and lower with 2000 lb wench and swivel left and right. BUT I ALSO USE MY D180 WITH CHAINS AND WEIGHTS. I like to play with them both. tee hee Share this post Link to post Share on other sites
Olratlr 25 #145 Posted January 7, 2014 What will you be using this winter to clear the snow? Ok, now that is just plain OUTSTANDING>... Got a cab for it with a heater? I made two stainless stell shrouds left and right that go over the exiting engine heat and it blows back to your seat. Haven,t started on a Cab yet 1 Share this post Link to post Share on other sites
dodgemike 52 #146 Posted January 8, 2014 I'll be using Dad's hand me down C121 w 42" plow. Weights and Chains. 36 years old and runs like A champ! I allready have dibs on His 312 Hjydro. Dad buys no parts Except from the dealer. He swears Toro/WH belts last longer. Sent from my SCH-S720C using Tapatalk 2 1 Share this post Link to post Share on other sites
RMCIII 838 #147 Posted January 8, 2014 Mike - you know the drill... Share this post Link to post Share on other sites
dodgemike 52 #148 Posted January 8, 2014 Here she is Sent from my SCH-S720C using Tapatalk 2 2 Share this post Link to post Share on other sites
dodgemike 52 #149 Posted January 8, 2014 As we say in the musclecar world, It's a good "ten footer". But it is a Worker.. Sent from my SCH-S720C using Tapatalk 2 Share this post Link to post Share on other sites
Lars 526 #150 Posted January 11, 2014 (edited) Here's a short vid of snowplowing Edited January 11, 2014 by Knusern 5 Share this post Link to post Share on other sites
