tywilk02 28 #1 Posted October 25, 2013 Just picked up this 1967 1057. My first wheel horse. 2 Share this post Link to post Share on other sites
SousaKerry 501 #2 Posted October 25, 2013 Nice start to the future collection, trust me more will come. Share this post Link to post Share on other sites
tywilk02 28 #3 Posted October 25, 2013 It runs great and mostly all original except for a missing deck height control rod and shifter knob and one roller on the deck. Share this post Link to post Share on other sites
Sparky-(Admin) 21,352 #4 Posted October 25, 2013 Looks like a stout machine. Might want to get some paint on the bare metal patches on the deck. Mike............. Share this post Link to post Share on other sites
CasualObserver 3,408 #5 Posted October 25, 2013 I agree, stout looking. I'm sure it will be a solid performer. 10HP on a basic three speed.... Is is just me, or do you not see too many of these? I wonder if more people opted for the six-speed? Share this post Link to post Share on other sites
tywilk02 28 #6 Posted October 25, 2013 I have noticed that information about them doesn't seem to be as readily available as other machines. I have yet to find any info as to whether the deck is original or not and I can't seem to find a shifter knob or rear roller for the deck. Share this post Link to post Share on other sites
CasualObserver 3,408 #7 Posted October 25, 2013 Holy crap... are you seriously from Munfordville? I know/knew someone from there. Is it still a "dry" county? Share this post Link to post Share on other sites
CasualObserver 3,408 #9 Posted October 25, 2013 PM sent. Share this post Link to post Share on other sites
KC9KAS 4,741 #10 Posted October 25, 2013 Yep, these GT's are just like Lays Potato chips.....You can't have just 1! Share this post Link to post Share on other sites
Martin 2,132 #11 Posted October 25, 2013 nice 1057. gotta love those early long hoods without the running boards...... great for mowing with a 42 inch deck. the drive pulley sizes arent real good for getting anywhere in a hurry, but only with the 3 speed trans a little lower gearing for working is necessary, as you dont have the hi/low speed box...... my 1057 is one of my favorites, but i guess i could say all of mine are my favorites though..... Share this post Link to post Share on other sites
AMC RULES 37,133 #12 Posted October 25, 2013 Nice first pick of vintage iron. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,072 #13 Posted October 25, 2013 Looks like a 48" deck. We don't have the RL-486 manual Garry Share this post Link to post Share on other sites
Jake Kuhn 1,555 #14 Posted October 25, 2013 Nice looking horse! Share this post Link to post Share on other sites
Martin 2,132 #15 Posted October 26, 2013 Looks like a 48" deck. We don't have the RL-486 manual Garry i could be wrong, garry, but i think that is a 42", i guess a tape measure would tell for sure........ heres pics of my 42sd on my 1277 and that one looks about the same width at the back wheels/guide wheels etc. i just went and looked at my 48 next to that 42 and there is a roughly 6" difference in the wheel center distance and that would really show up in the pics...... Share this post Link to post Share on other sites
tywilk02 28 #17 Posted October 26, 2013 Thanks guys I plan on being on here quite a bit looking and learning. As far as the deck size goes I haven't put a tape on it but compared to my neighbors 312-8 we were thinking it was a 48". Share this post Link to post Share on other sites
953 nut 55,394 #18 Posted October 26, 2013 The long frame square hoods are real workers, lots of option for equipment. I see no problem with becoming a Horsaholic, don't fight the feeling. Share this post Link to post Share on other sites
Retired Wrencher 5,469 #19 Posted October 26, 2013 (edited) very nice find I had 2 0f these. Great tractors with ton`s of power. these are made to pass down not 1 but 2 generations if taken care of. Enjoy it. Gary B...... Edited October 26, 2013 by T1257 Share this post Link to post Share on other sites
Wheel-N-It 2,969 #20 Posted October 27, 2013 As 953Nut says "Don't fight the feeling" !!! Congragulations on getting your first WH. Share this post Link to post Share on other sites