where can I find what snowblower fits my 520

[gabby 0]

will a 6900759 blower fit my 529h 6900759?

I meant to say 520h

my 520h is 6900148

[Dieselcowboy 210]

I'll piggy back on this and ask will a regular old single stage used on a C series or equivalent work?

[gabby 0]

no piggy backing I need my question answered,.

[zieg72 209]

I'll piggy back on this and ask will a regular old single stage used on a C series or equivalent work?

Yes

will a 6900759 blower fit my 529h 6900759?

I meant to say 520h

my 520h is 6900148

That # looks to be a serial #, we need a model # to answer your question

[gabby 0]

model # of tractor is 73502   thanks

[cheesegrader 433]

79361 is the two-stage

single stages with the attach-o-matic should fit too.

[gabby 0]

I guess i'll call the dealership tomorrow and ask them,then I'll post the answer.  thanks.

thanks cheeseburger,how can I look it up?

[gwest_ca-(File Mod) 11,041]

You can get to the attachment list here

https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro

Enter the 73502 and then select the 1996 link to the attachment list on the right.

The single-stage snowthrower is model 79360

The two-stage snowthrower is model 79361

Can not identify a model by it's serial number. Serials 1991 and up determine the model year.

 

Since these changed very little over the years models back to 1973 for the C-Series except C-195 will fit.

Make sure you get the lift tube and flag with it.

There are similar models that fit the vertical shaft engine models but won't work on the horizontal shaft engine models like you have in the 520.

See if you can get a model number.

 

Garry

[gabby 0]

_{thank you that was very helpful}

[gwest_ca-(File Mod) 11,041]

Is it a one-stage or two-stage?

 

Garry

[Kelly 1,029]

Where are you located ?? I have a few blowers that will fit a 520

[New wheel 23]

520h. First winter since I fixed this tractor up. Where can I find instruction to mount the blower. This is old school 1988. Also when removing my 48 deck I found the lift bar #112445 broke. The pin that runs side to side to the frame broke off at bar closer inspection it had been welded before . Is this needed for snowblower mount? Now I know why I wasn't getting much lift on the deck.

[ericj 1,578]

the bar you talk about is not needed for the snow blower after i started to respond i saw you are very close i have extra lift bars if you want to go that way i'll pm you my contact info

 

 

 

 

 

eric j

 

 

ps i'm installing a single stage snow blower on my 416-H today so if you need some assistance let me know i can give you some pointers  

Edited November 23, 2014 by ericj