Stigian 1,234 #1 Posted July 30, 2013 Howdo chap's, a quick question for you.. Would it cause any problem to the GT's trans if I used a 4 3/16 " engine pulley from a KT-17 (Ex C-175 that ran an Eaton 1100 trans) instead of the 4 3/4" pulley that's on the GT's original engine? Any thoughts Guy's? Share this post Link to post Share on other sites
meadowfield 2,595 #2 Posted July 30, 2013 I don't think so - the transmission is more efficient at the right revs, but unless you are tilling/mowing, etc and need the power most people go for saving gas and run the engine a little slower. For your purposes I don't think it's a big issue. Share this post Link to post Share on other sites
Stigian 1,234 #3 Posted July 31, 2013 Thanks Mark, I don't plan to do any tilling, but I do plan to use the GT for mowing.. Try it and see I guess.. The fun part is going to be getting the pulley off the remains of the KT engine.... But I have a 12 ton press and a plan Share this post Link to post Share on other sites
