Digger 66 3,478 #1 Posted July 28, 2013 I'm looking for anyone who may be willing to share pics of the rear lift mechanism on a Raider 10 This how mine was when I got it , I see it's fitted with some kind of cable housing running from the rear ( which would be to raise & lower the hitch ) but the hitch hardware is fashioned in such a way that it neither moves up or down . Or was there an additional piece that's missing ? Here are some pics of the rear as it sits : Any help is welcome & thanks in advance , -Gene . Hitch & bracket : I assume there was some type of cable fed through the tube ( arrows ) & some type of lever near the shifter(s) I don't see any mounting pivot for any lever that may have been there .... Share this post Link to post Share on other sites
Digger 66 3,478 #2 Posted July 28, 2013 Or was the current bracket simply removed and the desired attachment put in place when ready to use ? Share this post Link to post Share on other sites
stevasaurus 22,701 #3 Posted July 28, 2013 (edited) Check out the last picture in this link...the cable attached to the lift arm and goes through the tube. I can't believe I don't have a picture of mine and it is at my Mom's. check the pictures in this link... Edited July 28, 2013 by stevasaurus Share this post Link to post Share on other sites
bean 85 #4 Posted July 28, 2013 (edited) what you have on there now, is a trailer hitch. it is stationary. the slot style hitch and the later ,clevis style hitch mount in the between the trans and present hitch. Edited July 28, 2013 by bean Share this post Link to post Share on other sites
Digger 66 3,478 #5 Posted July 28, 2013 That's the pic I was looking for , THANKS ! ^ The cable lift system ( to my untrained eye ) just doesn't seem very sturdy ? What types of attachments is this designed to be used with ? Bottom-plow ? Share this post Link to post Share on other sites
Dual Drive Horse 6 #6 Posted July 28, 2013 (edited) I have the sleeve hitch, and it will lift a single furrow plough easily. When I eventually make a two furrow then I will probably fit a small electric winch to lift it Edited July 28, 2013 by Dual Drive Horse Share this post Link to post Share on other sites
rwilson 128 #7 Posted July 30, 2013 Hey the one on the right is mine!! It doesn't look like that now though. 1 Share this post Link to post Share on other sites
papaglide 542 #8 Posted July 30, 2013 The cable will work with a single bottem plow, harrow, disc and all of the assorted stuff. I have plowed up a 15 by 75 foot garden using my B 80 and a 8" single bottem plow attached to a slot hitch which was lifted by a cable. Its not a solid link like a cub but its just as sturdy. Share this post Link to post Share on other sites
