Long time dealer inventory/stuff coming to show????

[TomT 0]

Hello All,

I'm new here and, sorry, I have "special interests".

If the planets line-up, I'm considering bringing a relative's vast inventory of parts - used and new - to the show (family was a Wheel Horse dealer 60s-early 90s). He'd like to clean out his garage.

He has more stuff than I can bring - including tractors - including a nice, but slightly weathered, outdoor, lighted, two sided, WH dealer sign. Also has Stihl and E-Z Go signs but it appears that would have to be an off-site transaction :0).

So, if you need anything, please post with as much info as you can and I will check into it and bring it with me (if the planets do indeed line-up).

I will post more info later - including the tractor models and info.

 

If there is enough interest, it may help the planets line-up.

 

Do you get some weird "data mining" message when you try to access the Club site?????

 

Thank you!

Tom

 

 

[squonk 41,096]

I'm looking for a frt mounted PTO generator, C-125-145 hood and fender pan.

[whfan74 2,066]

I am looking for any old memorabilia that is Wheel Horse related. If it has the logo on it, I would be interested. Won't have room to haul tractors home this year.

[AMC RULES 37,130]

I'm interested in the  sign, NOS parts, and what model tractors are included in his collection. 

Edited June 16, 2013 by amcrules00

[clemedc 29]

I am interested in round hood tractors and parts

[limited12 360]

I would be interested in signs,manual, sales literature, and lawn ranger

[TomT 0]

Here's some of it:

Lots of NOS Wheel Horse belts - many with "Wheel Horse" printed on the belt

lots of long belts - some are Dayco

 

1 bottom plow - NOS - maybe tried once - new but not shiny paint/steel

 

Dump Cart - newer - has "Toro/Wheel Horse" decals

 

Not much in round hood stuff - maybe NOS parts

 

Tractors - most have been sitting but are all there except as noted - NO decks - all automatics have transmission issues:

 

414-8 speed in pieces but all there - nice - $350

 

312A - $250

314A -$250

Bronco 14 (auto) - $250

 

1276 auto - with snow blade and chains - $400.00

 

314A with very good 42" side discharge deck - suspected water in trans (may not be serious trans problem) - $700

42" deck only - $500.00

 

 

Round Hood vintage snow blower

Round Hood vintage snow blade(s)

 

 

Offers considered. Tractors will be going 230 miles one way please

 

I will check on the other posts and let you know.

 

Sign- $200.00

 

I can send pictures if you need them.

 

Quantity discounts available.

 

 

More to come.

 

Thanks,

Tom

[TomT 0]

I'm looking for a frt mounted PTO generator, C-125-145 hood and fender pan.

PTO Generator - no, sorry

Hood and Fender pan  - please send serial number

   Hood - may have one that was "used for about a month" - warranted for a minor flaw in the paint

    Fender pan  - have a brand new one in the box - steel

[whfan74 2,066]

Can you send me a pic of the sign?

[squonk 41,096]

 

I'm looking for a frt mounted PTO generator, C-125-145 hood and fender pan.

PTO Generator - no, sorry

Hood and Fender pan  - please send serial number

   Hood - may have one that was "used for about a month" - warranted for a minor flaw in the paint

    Fender pan  - have a brand new one in the box - steel

 

The hood can come off of any C-125, 145, or 65. The fender pan can come off of many models. The pan on my tractor now came off of a 266-H! These parts are going on my C-145 "Marvin"

 

 

Fender pan I have. IT fits but I want something nicer. I don't care if it's "not correct"

 

Her's the hood I want to replace:

Edited June 16, 2013 by squonk

[TomT 0]

Can you send me a pic of the sign?

 

Can you send me a pic of the sign?

[TomT 0]

 

Can you send me a pic of the sign?

 

Can you send me a pic of the sign?

 

Note that the left end aluminum angle retaining strip is missing - front and back are about same condition - no cracks - electrical condition unknown - likely nothing fancy

[TomT 0]

 

 

I'm looking for a frt mounted PTO generator, C-125-145 hood and fender pan.

PTO Generator - no, sorry

Hood and Fender pan  - please send serial number

   Hood - may have one that was "used for about a month" - warranted for a minor flaw in the paint

    Fender pan  - have a brand new one in the box - steel

 

The hood can come off of any C-125, 145, or 65. The fender pan can come off of many models. The pan on my tractor now came off of a 266-H! These parts are going on my C-145 "Marvin"

 

 

Fender pan I have. IT fits but I want something nicer. I don't care if it's "not correct"

 

Her's the hood I want to replace:

 

 

 

 

I'm looking for a frt mounted PTO generator, C-125-145 hood and fender pan.

PTO Generator - no, sorry

Hood and Fender pan  - please send serial number

   Hood - may have one that was "used for about a month" - warranted for a minor flaw in the paint

    Fender pan  - have a brand new one in the box - steel

 

The hood can come off of any C-125, 145, or 65. The fender pan can come off of many models. The pan on my tractor now came off of a 266-H! These parts are going on my C-145 "Marvin"

 

 

Fender pan I have. IT fits but I want something nicer. I don't care if it's "not correct"

 

Her's the hood I want to replace:

 

[TomT 0]

Sorry, I'm an amateur at this picture attaching stuff...

Fender/Seat Pan is brandsie new - wrapped in plastic - in the box

 

I'm still working on the hood pics - trying to get them to fit

[whfan74 2,066]

Tom can you tell me the dimensions of the sign?

Want to make sure I have room.

Edited June 17, 2013 by whfan74

[TomT 0]

Tom can you tell me the dimensions of the sign?

Want to make sure I have room.

 

You'll need some room - 3' High x 6' wide

[squonk 41,096]

The pan I'm definitely interested in. As far a hood I just need a straight clean one. I'm going to do a custom job and will be painting it a different color.

[TomT 0]

The pan I'm definitely interested in. As far a hood I just need a straight clean one. I'm going to do a custom job and will be painting it a different color.

The hood is definitely clean and straight - hard to tell from new - it's in the original box from the new one replaced under warranty.

It was replaced due to minor orange peel kinda spots on the top surface. It appears to me that this one isn't as sloped in the nose as the one in your pic - but otherwise the same.

I'll try to get the pics smaller so they will post.

Thanks

[whfan74 2,066]

Tom,

Working on the details right now. Would love to add it to the collection. Will have an answer for you this afternoon.

Thank you!

[TomT 0]

I'm getting down to the wire on what I'm going to haul this stuff with.

If anyone is interested in the tractors, please let me know today.

The 414-8 is a good piece - well, pieces - stored inside for the most part - not all faded and ugly.

 

The 42" deck is very good - paint good - decals good.

 

If someone is interested in the lot of tractors, let talk. It would be best if you picked them up but we can arrange something.

Location: Kane, PA - about 100 miles south of Buffalo, NY

 

Thanks

[multihobbyguy 35]

Do you have pictures of the 414-8 pile? Thanks, Chris.

[whfan74 2,066]

I guess I am going to have to pass. Just no way to get it back home unless I brought a trailer, which I really don't want to do. Someone will end up with a nice sign.

Unless someone is interested in helping with transportation.

:)

Edited June 17, 2013 by whfan74

[clemedc 29]

Tom

 Is your round hood snow blade just the blade and no frame? If so what condition and how much? and is the snow blower complete or missing pieces, condition and price.

Thanks

[baerpath 517]

I'll do the sign, Sorry Scott we both want one too

[rmaynard 15,446]

Tom,

I sent you a PM