BairleaFarm 340 #1 Posted August 11, 2008 YOu think this drive pulley doing this is the cause for my funny acting hydro on my C160? It may take a few minutes for this vid to be available. Share this post Link to post Share on other sites
illinilefttackle 399 #2 Posted August 11, 2008 :whistle: Duramax-Is that thing slipping in and out-or around and around also? Maybe under load it slips around the crankshaft then catches every once in a while on the key- AL B) Share this post Link to post Share on other sites
BairleaFarm 340 #3 Posted August 11, 2008 The in and out is what i was talking about. So im guessing its not suppose to do that. I didnt think about it slipping round and round. Good pint. Id better pull that PTo and check it out before I drive it much. Share this post Link to post Share on other sites
WheelHorse_of_course 99 #4 Posted August 12, 2008 Yeah, I would say you have found the problem. There are pretty simple to take apart. When you get down to the actual pulley my guess is that you will find a missing/broken key and possibly a missing allen headed screw or two. B) Share this post Link to post Share on other sites
BairleaFarm 340 #5 Posted August 12, 2008 :banana: I hope thats it. Ill get her apart int he next day or so hopefully Share this post Link to post Share on other sites
