sscottmanter 0 #1 Posted April 14, 2013 Purchased a wheel horse a couple of years ago and now have time to clean it up and make things right. First I need to know what model and year it is. Label on lower part of dash, were shift pattern is shown says serial 62-7715, the engine is a Kohler K161S serial 963676, SPEC 28890F. It has a push button start with a generator/starter. Also with this I have a dozer blade, mower deck and snowthrower. Will get to these items later. Charging system does not seem to be working but engine runs well. Would appreciate any help with id so I can find the correct info for repairs. Share this post Link to post Share on other sites
Sparky-(Admin) 21,739 #2 Posted April 14, 2013 Sounds like a 701 or 702. I know my 701 (1961) had a push button starter that worked in conjunction with a key switch. Not sure what a 702 (1962) had. Any pics?? Mike.............. Share this post Link to post Share on other sites
VinsRJ 723 #3 Posted April 14, 2013 (edited) Welcome to Red Square... lots of great people here to chime in! Edited April 15, 2013 by VinsRJ Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,173 #4 Posted April 14, 2013 Serial 62-7715 is a 1962 serial number. 62-7566 and 62-7857 are also model 702's Engines numbers look like a replacement for the original. Good section on the starter/generator in this manual 702 manual Garry Share this post Link to post Share on other sites
Motor Head110 7 #5 Posted April 14, 2013 First of all... !!!WELCOME TO REDSQUARE!!! This Site is VERY useful Second: I agree with Mike and Gary... Probally a 702 Share this post Link to post Share on other sites
Amanda 81 #6 Posted April 14, 2013 Welcome to red square!!!! :) Share this post Link to post Share on other sites
JC 1965 1,532 #7 Posted April 14, 2013 Hello and You'll like it here. Share this post Link to post Share on other sites
sscottmanter 0 #8 Posted April 14, 2013 Thanks all, i saw some pics of an 854 that looked pretty close, but I knew that was not the same as mine. i will look into the 701 ans 2 to see what looks right. I can see that I need to do some home work with more component id. will post some photos in the near future. Share this post Link to post Share on other sites
Jake Kuhn 1,570 #10 Posted April 15, 2013 of your tractor! Share this post Link to post Share on other sites
KC9KAS 4,742 #11 Posted April 15, 2013 , and you know that a picture (or 2) are worth a 1000 words! Share this post Link to post Share on other sites
dennist 139 #12 Posted April 16, 2013 Welcome, from Central Maine. Share this post Link to post Share on other sites
