belt routing on a 653

[tracer 3]

Could I get some help on the belt routing on a 653.

[AMC RULES 37,134]

[CasualObserver 3,408]

What specifically is your question?  There's three pulleys, you wrap the belt around them and you have to put the belt guard back on for the clutch to release. 

 

Are you referring to some sort of attachment belting, or maybe do you have a speed reduction kit that's throwing you off?

[tracer 3]

I am a new member here, so I might have lots of questions down the line. I am repowering a 653 wheel horse and just wondered how the belts were run. I was referring to the drive belt,and amcrules00 left me a real good manual referral,,,it really helped me out alot. Since I am here I would also like the belt diagram of the mower I have with the 653, 36 inch I Believe. Thanks.  And installation of the snow plow.

[AMC RULES 37,134]

Is this the same mower you're working with? 

 

http://www.youtube.com/watch?v=hnDEQRU9WuI&list=UUd_ptV1TUpPlW1VhCjxez_Q&index=16

Edited March 29, 2013 by amcrules00

[tracer 3]

Yes,,,that is it.  Thanks again.  That is one nice looking tractor.

[AMC RULES 37,134]

Here's the plow and frame, those brackets on the end of it's frame rails attach over the rear diff/axles.    

http://www.youtube.com/watch?v=GdZ7tyRpE-w&list=UUd_ptV1TUpPlW1VhCjxez_Q

Edited March 30, 2013 by amcrules00