701 Belt Cover Tab Pictures Needed

[rmaynard 15,718]

My 701 belt cover is in great shape with the exception of the mounting tab where it attaches to the engine. The tab broke off and the previous owner made a new one and riveted it on. I want to make a new one and have it welded on properly.

Does anyone have a good picture of an original 701 belt cover tab, and the dimensions?

Here is a picture of mine.

Edited February 15, 2013 by rmaynard

[buckrancher 2,694]

I will get pics and dim.tomorow as I have made new ones for mine

(and not out of SS)

Edited February 15, 2013 by buckrancher

[rmaynard 15,718]

Thanks Brian.

[buckrancher 2,694]

made out of 16ga 2" long

side with slot .950 tall

bottom .800 wide

slot is 7/16" by .675 long 1/2" up from bottom to center line .700 back from front edge to slot center line

1.325 from front along top edge to start of 45 angle

hope this helps

Brian

[rmaynard 15,718]

That is what I needed. Thanks again. :thumbs:

[MalMac 1,331]

And I will say thanks also, as I have to do the same for my 701.

[rmaynard 15,718]

I had a new tab fabricated, and today I had it welded onto my belt cover.

 

 

Thank again Brian.