zach l 2 #1 Posted February 7, 2013 Does anyone know the height of the lobes on a k361 cam? Share this post Link to post Share on other sites
TT-(Moderator) 1,131 #2 Posted February 7, 2013 This should have what you need: http://www.kirkengines.com/downloads/CamshaftTimingComparisons.pdf Share this post Link to post Share on other sites
baerpath 517 #3 Posted February 8, 2013 Zach You gonna use it for pulling ? I had one in my son's 12hp worked good but after putting a Vogel regrind in it did a lot better. Unless you have a 361 cam I'd just get one reground. What club ya pulling with? Western? Share this post Link to post Share on other sites
zach l 2 #4 Posted February 9, 2013 I have the 18 cam and no central new York Share this post Link to post Share on other sites
joel_400 59 #5 Posted February 9, 2013 I think you will be happy with the 18 hp cam. Ive run it for years in my stock class puller as the rules state "unaltered oem components" for the stock class I pull in. You can measure your cam to tell the lift, just take a dial caliper and measure the highset point of the lobe then subtract whatever the smallest point of the lobe(base circle) measures from that. Joel Share this post Link to post Share on other sites
