Martin 2,132 #1 Posted February 3, 2013 im wanting to get some of these decals made up for my one bottom plow. terry doesnt have them in his store..... ive only got this pic to go by and need a height and width of the decal. if somebody could provide me with the dimensions of the black oval part of the decal that would be great! thanks in advance for anyones help.... Share this post Link to post Share on other sites
Rock farmer 41 #2 Posted February 4, 2013 Look around, somebody is making them. That's the standard implement decal isn't it? Share this post Link to post Share on other sites
Martin 2,132 #3 Posted February 4, 2013 yes, i know i can buy them, just trying to keep it all local. i have the layout, just need the height and width of an original decal and then they can be reproduced. Share this post Link to post Share on other sites
Terry M-(Moderator) 2,176 #4 Posted February 4, 2013 Martin, If you get that one reproduced I would be interested in a pair. Would Terry be making and selling these? Share this post Link to post Share on other sites
Martin 2,132 #5 Posted February 4, 2013 i will let terry chime in on that...... Share this post Link to post Share on other sites
Rock farmer 41 #6 Posted February 4, 2013 My plow decal measure 6" wide by 1-1/4 high. But let me confirm that in the daylight! Joe Share this post Link to post Share on other sites
Martin 2,132 #7 Posted February 4, 2013 My plow decal measure 6" wide by 1-1/4 high. But let me confirm that in the daylight! Joe can you check to see if that is the cut line of the decal, or the black oval? thanks.... Share this post Link to post Share on other sites
Rock farmer 41 #9 Posted February 4, 2013 Well, I looked at mine daylight. And I just can't tell! I can follow the black oval around. So, I feel good about the 6"x1-1/4". But I can't diffintivly find the edge of the decal. Joe Share this post Link to post Share on other sites
Vinylguy 4,674 #10 Posted February 23, 2013 Had some time to work on this today Martin. the detail one will take some time but I think I can get it close. 1 Share this post Link to post Share on other sites
Vinylguy 4,674 #11 Posted February 24, 2013 Finished up the repliation of this Brinly serial No decal. Now to the main shop for the race party. 1 Share this post Link to post Share on other sites
redone 45 #12 Posted February 2, 2017 Where and whom makes reproduce decals for Kohler engines? Share this post Link to post Share on other sites
wheelhorseman 3,211 #13 Posted February 2, 2017 @Vinylguy makes them - here is a link http://www.redoyourhorse.com/kohler/ Share this post Link to post Share on other sites
