It is a start for now........

[Retired Wrencher 5,503]

:USA: as you can see this is a beginning. I had this for at least 4 yrs. took it all apart. to restore. sat in the corner for that time and collected dust. I have a 1057 that is 1/2 done and I sold a show tractor this summer,so I said why not put this back together and use it while I am redoing the 1057. I have all the decals for this so I am all set there. the engine is fine and the tranney is fine. so I hope u enjoy the picks. Gary B.... Also does any one now where this bracket goes I check in all my manuals and can not find this any where??????

[ol550 830]

My guess is coil mounting bracket. :confusion-confused:

[Kelly 1,029]

Yes coil bracket, bolts to the front two oil pan bolts, if you try it you will see how it fits.

[Sparky-(Admin) 21,398]

Good luck with it Gary! I see a busted hub....bummer.

Mike............

[Retired Wrencher 5,503]

:USA: Yes Mike these are hard to find because it is 3/4" hub I hope Kelly has one in his stock pile.I hope to have it done for the spring.I will see u in the spring ok Gary B....

[rmaynard 15,580]

Yes Mike these are hard to find because it is 3/4" hub I hope Kelly has one in his stock pile.I hope to have it done for the spring.I will see u in the spring ok Gary B....

Didn't know there was a 3/4" hub. Are you sure it's not a 1"?

[Sparky-(Admin) 21,398]

I agree with Bob....its gotta be a 1" hole in that hub. I'm sure it wont be hard to find one of those.

Mike.............

[Retired Wrencher 5,503]

yes this is what happens when you do not use your tools. it is 1" I was reading the manual wrong. I put the fellers out to Kelly in hopes he has the old style hub thanks every on Gary B.....

[SousaKerry 501]

That bracket goes on the "top" says so right on it... :ychain: