Shynon 7,450 #1 Posted December 9, 2012 Did a search and could not find, so my apologize as I though I have seen this discussed before. I have 2-62 lawn rangers and both are missing the stub shaft that holds the right foot stirrup. I am looking for dimensions for this, or if you have a spare you would like to get rid of. Thanks Shynon Share this post Link to post Share on other sites
TT-(Moderator) 1,131 #2 Posted December 9, 2012 A little info here: ....and here: The only pictures I have: By the way ~ the right side does not get a 'stirrup' footrest. Share this post Link to post Share on other sites
Rollerman 290 #3 Posted December 9, 2012 I don't think the 62 Lawn Rangers had a right footrest. At that time Wheel Horse left it off because it interfeared with the belt runing the deck. "Edit" refreshed the page before posting & see TT got it covered. :handgestures-thumbup: Share this post Link to post Share on other sites
littleredrider 409 #4 Posted December 9, 2012 What was said. I have a 63 and didn't have one. PO put a brass collar thing on, then a piece of 3/4" long enough to put a foot rest on. I've since swapped frames from a 67, so now have better turning and clearance for the mower belt. Share this post Link to post Share on other sites
Kelly 1,029 #5 Posted December 9, 2012 If anyone needs the right side foot rest I have a NOS one setting right here on the desk, send me a PM. With this ext. on it will be your foot rest, a standard footrest will not fit over this piece. This is the one I have, paint is a little beat up but what do you want for 50 years old. Share this post Link to post Share on other sites
Shynon 7,450 #6 Posted December 10, 2012 After seeing the NOS Kelly has I looked at my donor ranger and it has one on it although it is on backwards. I thought it was just a piece of pipe. Looks like I will make and extension to install a stirrup. Share this post Link to post Share on other sites