My C-125

[Stormin 9,981]

I acquired my C-125 about a year ago.

The tractor it's self is in pretty good condition for it's age.

The cutter deck was something else though.

So a bit of rebuilding had to be done.

First strip the deck.

Deck was used as pattern for new top

Then old top cut out.

New top welded in and painted.

All re-assembled.

I fitted two new spindles as they got damaged getting them out. Also renewed all the bearings.

[AMC RULES 37,125]

WOW! That deck turned out awesome.

[JackC 617]

Nice piece of work.

[Wheelhorse84 87]

Nice work.

[Tankman 3,518]

Beautiful work. A project well done! :bow-blue:

[welderman85 53]

nice work the deck looks great

[bowtiebutler956 650]

Very nice work. Most people would have replaced that deck, but I find its very rewarding rebuilding something that most would have scrapped! My hats off to you.

Matt :flags-texas:

[Ken B 3,164]

Very nice work! I bet its not too easy to find a replacement deck where you live.

[Zeek 2,286]

Great fab work on that deck!

[SousaKerry 501]

Nice job, yeah too bad you arn't here in the States I have 4 or 5 of those 36" decks laying around that I just can't quite bring myself to take to the scrap yard even though they are all rotten but not as bad as the one you started with.

[Stormin 9,981]

Thankyou for your comments.

There was noway I could afford a new deck. About £500 I believe over here for a bare one. SWMBO would not have been happy and discretion is the better part of valour. Cost me just over £100 and a bit of time.

[312Hydro 474]

Great fabrication on that deck! :handgestures-thumbupright:

[Cole 25]

Great Job! I'll bet that took some skill

[Stigian 1,234]

Nice job dude, I need to do the same on one of my cutting decks.. It's finding the time..

[groundhog47 347]

I acquired my C-125 about a year ago.

The tractor it's self is in pretty good condition for it's age.

The cutter deck was something else though.

So a bit of rebuilding had to be done.

First strip the deck.

Deck was used as pattern for new top

Then old top cut out.

New top welded in and painted.

All re-assembled.

I fitted two new spindles as they got damaged getting them out. Also renewed all the bearings.

Now that is just wow, The before picture I' sure is the brother of mine!!! Now we know what surgery is required!

[JoeM 7,871]

That's alot of work! I have done the back half never the full top. Nice job, should last a long time.

[krazy_horse 59]

Great work and you sure have a lot of skill,!!

["D"- Man 827]

Wow! That's what I call really "decked" out. Mark.