D180 PTO Tiller Question

[blackdogfarm 0]

really so I can get the ones I have refaced?

Maybe someone around here does that sort of thing.

I am in southern Maine.

[blackdogfarm 0]

oh cut the small talk and get to trators !!

I am glad I found this website!! :dance:

[otrelwood 32]

yes they do that ,the place by me rebuilds clutches for every thing that takes a clutch so i would check at your local farm tractor or big truck dealer and see if they recommend anyone in your area. i have another clutch around here but its starting to throw one of the surfaces off

[1maidenfan 202]

i dont know where you are located but we have a place in south bend in. called south bend clutch that will reface that for you. o On the differences on a d 180 and an 18 auto the auto had either 15 or 16 in tires on the rear as opposed to the 180's 12s also the 18 auto i had ,had a shorter grill housing and the grill had 6 bars as the rest have 7

Good point on the tires!

Was wondering why my 18 auto has 15" tires and my other D's have 12" :techie-eureka:

[blackdogfarm 0]

really they are 15s? so I could put regular car tires on them? :P

[1maidenfan 202]

really they are 15s? so I could put regular car tires on them?

YES, if you have original rims on it they should be 15".

Problem is, they are expensive to replace with regulat tractor tires.

By the look of yours you dont need to worry about replacing them and if the start loosing air just put tubes in them.

[68charger 0]

Hello,  I am looking for the other end that goes into the tiller, 36 spline I believe, 5" long, .875 diameter, the other end has a 1/4 " keyway and a roll pin . Shaft part number is 10082, tiller model number is 7-1260 , if any knows where I can get one please let me know, thanks Justin 

[rjohnson9876@hotmail.com 0]

I am looking for a tiller for my  D200 If anybody knows where one is for sale please contact me