Jump to content
Rollerman

D250 questions

Recommended Posts

 
sparky6398

Thanks, that's great info on my machine.

Share this post


Link to post
Share on other sites
 
56flatbed

Nice pic of a restored DS2500 on the Gutbrod website, but the driver is on the hood. :eusa-whistle:

 

Wally

Share this post


Link to post
Share on other sites
 
C-101plowerpower

Nice pic of a restored DS2500 on the Gutbrod website, but the driver is on the hood. :eusa-whistle:

 

Wally

 

you mean this one? 

fe7cd9d2f0-Poster.jpg

 

Koen

Share this post


Link to post
Share on other sites
 
brandonozz

Now that is one sexy tractor!

Share this post


Link to post
Share on other sites
 
N2 Tractors
On 1/11/2014 at 3:06 PM, C-101plowerpower said:

since the d250's are pretty much the same as gutbrod 2500, parts can be found in germany

http://gutbrod-schrauber.de/ersatzteile-f-r-2500-s.html  (Bad Link)

http://ersatzteilhandel.jimdo.com/gutbrod-2500-getriebe/ if you open the pdf on that site you'll get an exploded view of the transmission (Bad Link)

http://ardiehl.de/Gutbrod/Gutbrod_2500_Benzin_Motor.pdf engine pdf

hope this helps

 

Koen

 

On 1/14/2014 at 1:01 AM, C-101plowerpower said:

 

The last two links are great for part numbers.  Thank you very much.  I need a starter and a water pump for my D250 with Ark 550 FEL and ARPS Box Blade set up.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • BuffaloD200
      By BuffaloD200
      Hey all, 
       
      My '74 D180 has a lot of trouble pushing snow.  Weighted tires, but nothing else at this time.  I've found it gets stuck frequently and only one wheel spins.  Do these tractors not have a limited slip/locker arrangement?  How does everyone manage with the infamous one wheel peel?
    • BuffaloD200
      By BuffaloD200
      Hey all, I need to install a drive belt on my 75 D180 for my snowblower.  I've looked through a bunch of D-series owner's manuals, and none seem to mention replacement procedure.  The PTO pulley is fixed, save for engaging the PTO and there is minimal movement at the snowthrower pulley. There's no idler or tensioner as far as I can tell.  Do I have to remove the PTO pulley?  That seems to be a required service item.
      Same question for my 80 D200 as well really.  
       
      Using the recommended 4L490W belt.
       
      Thanks 
    • ihatephones
      By ihatephones
      I got a D-180 for $250, and the governor is messed up, the points won't open or close, and I took it apart and was being stupid and messed some stuff up in there, and now I need a new one.
      Where can I get one that's not on eBay for $200?
      I also forgot to say it was a Kohler K482, and I'll throw some pictures of the tractor in as a treat.


    • Southern_Secret
      By Southern_Secret
      Hello fellow Horse Heads long time no post for me, life gets crazy & a lot of things change sometimes but anyhoo. So back a few years ago when I first got my 1994 314-H I had it at my shop going threw it. One of my customers walk past as im working and said, you know I think Iv got a Wheel Horse & im thinking "no you dont buddy". I give him my # to send pics thinking it was a big waste of time & after getting the pics I realized he did have a Wheel Horse! I hand shake bought it right there, asked him to bring it to my store & he said no problem. Well after almost 2 years it is finally in my orbit. I know very little about it other than his father-inlaw got it new and used it around his house moving snow and stuff. His father inlaw moved down south here when his daughter got married and gave the tractor to my customer because he had a farm & his the inlaw had no use for it anymore. Same with every barn find, "it was running when parked" 8 years ago, said one of the axel seal is leaking. Im happy and hope I can get it back in running order soon cause it is going to be handy around the truck farm!!
       
      I will post Pics as soon as I reinstate my membership





    • Swemill
      By Swemill
      Hi everyone!
      Long time since i was here and my old pics is gone from the forum.
      I just uploaded a movie with pics on youtube, and thought i could share it for you guys.
      I would love to get some comments on my Youtube channel, from you true Wheel Horse fans! 
       
      Thanks and Best Regards  
       
       
×
×
  • Create New...