C-175 Automatic won't go.

[Butch 194]

Lately my C-175A won't go unless I start pushing it first. It won't go forward or backward. I'm worried it may not go even when pushing it. Any ideas? Thanks.

Butch

[Doorvip 1]

Have you checked your drive belt from the engine to trans ?

[Agage1 83]

I have the same problem on one of my c160 s, I gotta push it to get it to go. There is a thread in the transmission forum right now about this problem

[TT-(Moderator) 1,145]

Have you checked the woodruff keys at the wheel hubs?

[kthack657 279]

Definate;y start with the easy fix...the belt that was the problem I had with my charger 12...took the belt off and there was a huge chunk taken out of it...

[Butch 194]

I'll check out the belt and the woodruff keys. Thanks guys. I guess I'm looking for a slipping belt.

[gomer gump 8]

check drive belt ,hub keys, hydro fluid too low or overfull hydro linkage out of adjustment / cam plate adjustment, motor bad , unidrive wore out some things to check

[Agage1 83]

Mine has been doing the same thing. When I was tinkering with it the other day I noticed the hydro relief valve was slightly open. I tightened it down and it ran fine all day. Don't know if it was coincidence or not, the tractor has it's good days and bad days.