Removing paint off cooling fins ( noob question)

[cubflyer 4]

Whats the best tool, and best method to removing paint off the cooling fins?

[dodge78 90]

I found this will take off a lot of paint when I cleaned the tranny on the 418-a.

http://www.menards.com/main/tools-hardware/auto/maintenance-fluids/zecol-10-oz-carburetor-cleaner-spray/p-1679710.htm

[Cole 25]

i like to use a dremel with a small wire wheel or sanding attachment, it fits real good inside the fins and makes them real smooth

[cubflyer 4]

Thanks for the suggestions :)

[SousaKerry 502]

good stiff wire brush and a lot of elbow grease

or a sand blaster :hide:

[Coadster32 793]

I found this will take off a lot of paint when I cleaned the tranny on the 418-a.

http://www.menards.c...y/p-1679710.htm

That could be learned the hard way....as well as brake fluid.

[KC9KAS 4,741]

Oven cleaner works well, but use it in a well ventilated area, and wear gloves....That is some wicked stuff!

Or build an E-tank....http://antique-engines.com/electrol.asp

[cubflyer 4]

Thanks for the great information.