Toro Groundsmaster

[TT-(Moderator) 1,131]

I know there are 52" and 62" decks for the GM220 models.

 

Here's the routing diagrams for both:

 

What is the model number of the deck on your 220?

[TheAnonymousThomas 0]

the 62 is the right one for me, Thanks TT. NExt problem is that my back tires got holes in them and there's a cap that i can't get off. any ideas?

[TT-(Moderator) 1,131]

The dust caps on the rear hubs pull off.
I use slip joint pliers. (a.k.a. ~ Channel Locks)

 

This might help: http://www.autozone.com/autozone/repairinfo/common/repairInfoMain.jsp?targetPage=productsHowToInspect&leftNavPage=productsHowTo&pageId=%090900c1528021404e&subtitle=replace

[TheAnonymousThomas 0]

Thanks for that TT, here's a shot of my deck...

Here's the back. Where my current problem is...

And my weapons of choice...

[parson 0]

Help, please!!  I have a proline 118. it worked fine last year, but sat until this week. Now every time I try to engage the deck it stalls. It also stalls the engine if I try to move forward or back any quicker than a super slow crawl.  Any ideas??  Thanks!

 

[6wheeler 603]

I have a 77 GM 72 with the Continental engine. It has a 72" deck. Currently? It is sporting my Toro 2760 Flail Mower. The engine is getting pretty tired. It burns 2 qts. of 30w with every mowing (3 acres). The plan for a winter project is to put a B1105 Kubota in it this winter. Just have to figure out the front drive off the crankshaft. It will be interesting.

[CCR 0]

Where did you get you replacement decals?

[CCR 0]

Where did you get you replacement decals? (Groundsmaster 325D)