520 hydro lever

[fng120 0]

Hi guys, Have a quick question. My 520 hydro lever is hard to push forward. It goes in reverse easy. Nothing is bent and I can't figure this one out. Any help is appreciated. Thanks, Tim

[varosd 1,185]

check under the seat at the cam/friction washer adjustment. mine was all clogged with grass clippings! what year 520?

[fng120 0]

1989

[Kelly 1,029]

Make sure the parking brake arm under the center console is free and not rusty, I've had them stiff and make the forward control very hard to move and they will limit travel so you will not have full forward movement, if you push the brake pedal with the cover off you will see the part that centers the hydro control that is what I'm talking about, I've fixed a few that were that way.

[fng120 0]

Thanks for the replys guys. I will check these when I get home in the morning.

[varosd 1,185]

:wwp: