Jump to content

 
Countdown To Christmas!
 

 
Sign in to follow this  
Followers 0
tommyg

Transmission Filter Screen Damaged-d180

By tommyg, in Transmissions and transaxles

Recommended Posts

tommyg    152

tommyg
Posted

Looks like the pawl is in good shape. Still struggling with the other hub, though. Patience, patience, patience. :banghead:

Share this post

Link to post
Share on other sites
 

tommyg    152

tommyg
Posted

The new and the old. This is what it was supposed to look like. (I think.)

post-5507-0-83606900-1342563073_thumb.jp

Does anyone know about that ring on the motor side of the screen? This one isn't attached. It kind of presses on by hand, but the screen will most definitely fall off inside the tranny again in no time. Was this glued to the screen? If so, what do you think I should use to glue it?

post-5507-0-73103100-1342563115_thumb.jp

Share this post

Link to post
Share on other sites
 

JamesBe1    82

JamesBe1
Posted

If I recall correctly, on mine, the ring was attached to the screen assembly. My guess is that the ring was crimped onto the the screen assembly at the factory, and the one you have has worked itself off. I'm not sure what the best way to reattach it is. Hopefully someone else has an idea. JB Weld maybe?

Share this post

Link to post
Share on other sites
 

tommyg    152

tommyg
Posted

Yeah, I keep forgetting about JB Weld. Good idea!

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing
  • Similar Content
     
     
    • BuffaloD200
      HELP! D-Series Clutch
      By BuffaloD200
      '74 D-180
       
      My friction disc in gone on my clutch.  I saw the old post about making a new friction disc, so I'm not concerned about that.
      I managed to remove the front clutch plate and double v-belt pulley.  But I can't separate the two.  When I took the assembly off the spiraloc washer popped off on its own.  I HAVE READ THE MANUALS.
      So I should be able to just remove the pulley from the front clutch and continue with step 4.  The v-belt pulley is loose as all hell and flops around like a dead fish.  It seems to be hung up on a ring or bearing race.  
      So my thoughts are grab a BFH or sparky the blue tip wrench.
      Is there an unpublished step 3.5, or some trick?
    • BuffaloD200
      D-Series One Wheel Peel
      By BuffaloD200
      Hey all, 
       
      My '74 D180 has a lot of trouble pushing snow.  Weighted tires, but nothing else at this time.  I've found it gets stuck frequently and only one wheel spins.  Do these tractors not have a limited slip/locker arrangement?  How does everyone manage with the infamous one wheel peel?
    • BuffaloD200
      D series Belt Replacement
      By BuffaloD200
      Hey all, I need to install a drive belt on my 75 D180 for my snowblower.  I've looked through a bunch of D-series owner's manuals, and none seem to mention replacement procedure.  The PTO pulley is fixed, save for engaging the PTO and there is minimal movement at the snowthrower pulley. There's no idler or tensioner as far as I can tell.  Do I have to remove the PTO pulley?  That seems to be a required service item.
      Same question for my 80 D200 as well really.  
       
      Using the recommended 4L490W belt.
       
      Thanks 
    • ihatephones
      Governor for a D-180
      By ihatephones
      I got a D-180 for $250, and the governor is messed up, the points won't open or close, and I took it apart and was being stupid and messed some stuff up in there, and now I need a new one.
      Where can I get one that's not on eBay for $200?
      I also forgot to say it was a Kohler K482, and I'll throw some pictures of the tractor in as a treat.


    • Southern_Secret
      IT'S a D-180 & IT'S all MINE!!
      By Southern_Secret
      Hello fellow Horse Heads long time no post for me, life gets crazy & a lot of things change sometimes but anyhoo. So back a few years ago when I first got my 1994 314-H I had it at my shop going threw it. One of my customers walk past as im working and said, you know I think Iv got a Wheel Horse & im thinking "no you dont buddy". I give him my # to send pics thinking it was a big waste of time & after getting the pics I realized he did have a Wheel Horse! I hand shake bought it right there, asked him to bring it to my store & he said no problem. Well after almost 2 years it is finally in my orbit. I know very little about it other than his father-inlaw got it new and used it around his house moving snow and stuff. His father inlaw moved down south here when his daughter got married and gave the tractor to my customer because he had a farm & his the inlaw had no use for it anymore. Same with every barn find, "it was running when parked" 8 years ago, said one of the axel seal is leaking. Im happy and hope I can get it back in running order soon cause it is going to be handy around the truck farm!!
       
      I will post Pics as soon as I reinstate my membership





    		 
×
  • Create New...