Custom 2 seater Rat build

[Ken B 3,164]

All it needs John is an aaaooogah horn mounted on it now! (and some black leather on the seats)

[wallfish 16,964]

This was my last custom build and since it was sold, I've been wanting to do another build but just haven't got around to it. Decided to do a copy of this build and the plan is to try and have it done for this years big show.

 The lowered front axle is done, welded some frame parts and collected most of parts needed. Had to buy new front fenders and will use a cut up old RJ hood I got from AMC Rules that came from Stevebo at the show a couple of years ago. Finally found a use for it!

I'll try and post some build pics as it progresses.

 

I do have another build in the works too but doubt both can be finished by the end of June

[19richie66 17,497]

You know I'll be watching this with excitement.

[857 horse 2,581]

creature comforts

great job john

see you in june.....

howard in VA

(small round hood 8 speed)

[wallfish 16,964]

Hey Howard, good to see you are going again. Do I need to bring any more 1/4" rod for belt stop fingers? We should be set up in the same area again so be sure to stop by and say hello.

[857 horse 2,581]

HEY JOHN,,,,,,,,,,,,,,,,,,,,,,,,,,,,

 

                TELL YOUR BROTHER IM BRINGING THE 8 SPEED 2 H.P. MACHINE AGAIN...IT LOST ITS HAND CLUTCH IN FAVOR OF A PEDAL,,,,I WILL BE THERE THURSDAY,.,,,,,SAME SPACE,,,,,,AND WILL TRY TO HOLD YOURS IF IM THERE FIRST,,,,TELL DAD HELLO...SEAT WILL BE THERE FOR HIM...

 

              AND JOHN,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,TELL DAD HE DID A GOOD JOB.....

              SEE YOU AT THE BIG ONE IN JUNE...AND DIDNT FORGET THE IOU MEAL...     LOLOLOLOLOL

[wallfish 16,964]

SEE YOU AT THE BIG ONE IN JUNE...AND DIDNT FORGET THE IOU MEAL...

I forgot all about that.  Mmmmmmm T-bone steak with a few cocktails at one of those expensive Gettysburg joints shold do!

Hopefully I can get this clone 2 seater done in time. I'd like to see the look on Bill's face (owner of the 1st one) when I roll up with it.

[Sparky-(Admin) 21,292]

This was my last custom build and since it was sold, I've been wanting to do another build but just haven't got around to it. Decided to do a copy of this build and the plan is to try and have it done for this years big show.

 The lowered front axle is done, welded some frame parts and collected most of parts needed. Had to buy new front fenders and will use a cut up old RJ hood I got from AMC Rules that came from Stevebo at the show a couple of years ago. Finally found a use for it!

I'll try and post some build pics as it progresses.

 

I do have another build in the works too but doubt both can be finished by the end of June

Maybe a bit of padding on the seat this time??

 

Mike...........

[wallfish 16,964]

Don't worry Mike, I'll pad the seat for ya this time!   (Got Roids?)  

KenB hooked me up with some black leather for the last one but never got around to it before it was sold.

[wallfish 16,964]

Been pecking away at the new one.

Got the firewall, most of the steering and 90% of the frame is done.

Still waiting for some sprockets and a new carb for the M8 to show up.

 

[AMC RULES 37,124]

           

[857 horse 2,581]

4 WEEKS JOHN

GOOD LUCK....

HEY YOU COULD EVEN BRING IT AS A WORK IN PROGRESS

[squonk 41,008]

I'll be bringing a can that says GAS on it in case it's needed! 

[squonk 41,008]

Been pecking away at the new one.

Got the firewall, most of the steering and 90% of the frame is done.

Still waiting for some sprockets and a new carb for the M8 to show up.

I like the term, " Firewall" ! 

[wallfish 16,964]

Got some more done and was finally able to take it for a test drive today. Should be done before the big show but probably won't have time to get it painted. I'll be shopping for a new steering wheel and an 8 speed shifter for it.

[AMC RULES 37,124]

Fire wall does kinda sorta look flammable.  

[857 horse 2,581]

4 DAYS TILL WOPNER..!!!!!!!!!!!!!!!!!

[857 horse 2,581]

4 DAYS TILL WOPNER..!!!!!!!!!!!!!!!!!

AND DONT SHOOT YOUR EYE OUT !!!!

[wallfish 16,964]

Gett'n closer.
It's not going to be completely finished but I'm going to bring it.

[19richie66 17,497]

I like it!  Actually looks good with no front fenders. 

[wallfish 16,964]

Too Late Richie, got'em on tonight! I don't like these new fenders compared to the older type I used for the last one but oh well
Got some more done. Sparky will like those cushions!

[Sparky-(Admin) 21,292]

 Sparky will like those cushions!

 

I would if I was going this year.....but life has gotten in the way  . Maybe this machine will make an appearance at the next Zagray show??
Mike............

[wallfish 16,964]

Did you spell WIFE wrong?
I forgot you weren't able to make it this year. Bummer!
 

[stevebo-(Moderator) 8,330]

I would love to take a ride on that bad boy with you John !! 

[wallfish 16,964]

NO Problem! Take it for a ride with your son too!
Actually, ANYONE who asks is more than welcome to take her for a spin. Very simple centrifugal clutch drive so just put it in gear, hit the gas and go. This one doesn't pull wheelies like the last one, bunch of added weight up front this time. Don't worry about anything breaking either, it's still under warranty!