Lars 526 #1 Posted June 15, 2012 Hey guys.. I need a trans pulley to my suburban 551. pulley went very smoothly of the tranny ... Until I managed to drop it in the floor then it was damaged .. https://dl.dropbox.com/u/26984719/Suburban%20551/IMAG0690.jpg Share this post Link to post Share on other sites
bowtiebutler956 650 #2 Posted June 15, 2012 I hate it when that happens! I do that kind of stuff all the time. When I was rebiulding my B-80, I was trying to get the drive pulley of the engine, and I thought I would gently pry a little on it. Not gently enough, I boke about a 2inch section out of the cast iron pulley! Matt :flags-texas: Share this post Link to post Share on other sites
Lars 526 #3 Posted June 16, 2012 yeh thats my luck too.. LOL Share this post Link to post Share on other sites
stevasaurus 22,867 #4 Posted June 16, 2012 Lars, you need to wear your magnetic gloves when working on the horse. :) Maybe Racinfool has one...what are the measurements...I may have one here. Also, may find one at the show next week. Share this post Link to post Share on other sites
racinfool40 202 #5 Posted June 16, 2012 Steve. I don't have one and it is 3/4 input shaft and 4" diameter...Pretty common on the 4 speeds but I'm out...Racinfools tranny parts is gettin kinda low..LOL...If some one has one and can get ti to me....I have a box of goodies I'm getting ready to ship To Lars and I can throw it in the box.. MIKE Share this post Link to post Share on other sites
stevasaurus 22,867 #6 Posted June 18, 2012 I'll look around at the show. Mike, what do you think is a good price for one??? Share this post Link to post Share on other sites
racinfool40 202 #7 Posted June 18, 2012 Got one comin Thanks to Mike (Sorkiwi) He is gonna get it to me and I will put it with the rest of the parts I have here for Mr. Norweign HillBilly (Lars).. And Hopefully get them shipped out soon. MIKE Share this post Link to post Share on other sites
