D-250 3 point hitch drawing & Dimentions

[3spaniels 0]

I would like to add a three point hitch to my D-250. I have been looking for the factory hitch for some time now with no luck. Does anyone have a drawing with dimensions of the hitch that was available from WH to fit this tractor they would be willing to share? I have my welder set-up and looking to get some fire in the wire.

[meadowfield 2,619]

Whilst maybe not identical, here is my thread and dimensions.

mark

[wheeledhorseman 575]

As far as I know and can work out from the Toro site a D-250 had the same 3-point as the other Ds. One product number supersedes to another with time but they're all pretty much the same.

You'll find the diagram of a 1977 product here

https://lookup3.toro...Toro&lang=us_en

Here's a photo of mine on a D-200

Andy

[wheeledhorseman 575]

Sorry copying that link didn't work try this link

https://lookup3.toro.com/partdex/PartPage.cfm?xCaller=Toro&PageID=320883&PdfPath=5/5303/39670003.gif&Rez=1x&MYBE=6116&PageName=3%2DPoint%20Hitch%20%28factory%20Order%20No%2E%208%2D5422%29%20%28for%201973%2018hp%20Automatic%2D1974%20%261975%20D%20Series%20Tractors%29&DrawingIndex=1

Andy

[3spaniels 0]

Thanks for the help, I really do appreciate the assistance.

Now, I have to get to work on one.

Bill

[jmack 35]

Did you get your 3 point hitch fabricated?  I'm looking for one as well to upgrade my D-180.