Jump to content
Sign in to follow this  
Followers 0
Trouty56

Engine pulley clearance (tecumseh)

By Trouty56, in Engines

Recommended Posts

Trouty56    565

Trouty56
Posted

I am doing a little spring cleaning on a 1969 Charger 10 with a transplanted Tecumseh HH100 engine. When I pulled the engine pulley there were two, bigger than the pto shaft, washers behind the 7914 pulley. Now this calls for the 7443 pulley but this is a 51/4 inch pulley also. I think they are similar but possibly diffferent on the inside. The pto shaft has a small offset about 1/8 inch from the bearing plate for the pulley to ride on but the pulley touches the plate if pushed in all the way without those huge washers. Maybe the difference in pulleys is that this pulley is not flat on the back and the 7443 is????maybe??? I was thinking of placing a brass 1/8 thick 1 1/8 ID thrust bearing behind the pulley to provide clearance.....any advice????

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • 12 hp Kohler
      Charger and Raider LSD
      By 12 hp Kohler
      Been looking at a lot or Raiders and Chargers lately and was wondering if they all have LSD? I know most of them did but I was wondering if some of the later models might have had the Uni drives instead ? 
       
       
       
      Thanks, Robbie. 
    • RJ Hamner
      1970 Charger 12 model 7251
      By RJ Hamner
      I am wondering if there was ever a Service Manual for this particular tractor.
      So far all I have found are Owners Manuals (one came with the tractor)
      Since this is my first attempt at a HW with a Hydro I am probably going to need all the help I can get
      Any help will be appreciated
      Bob
    • Nate89
      Some one help me
      By Nate89
      Look to see if someone can help me with on identifying my wheel horse on what year it is wheel horse charger 12 modle 1 0401 7 
    • Conner Anderson
      wheel horse charger 9
      By Conner Anderson
      I own a Charger 9, it is a 68 and I am wondering what I should ask for it. 
      I personally want to trade it, just cannot find anything worth my efforts.
      I found a younger gentleman in his 20's, he's over 650 miles away from me and he has himself a raider 12, I want it just he wants two tractors for it. 
      I personally feel my Charger is worth more than 250, as it is one of a kind.
      Please, let me know. 
    • gp2
      Charger V7 Hydrostatic Transmission Fluid
      By gp2
      I just obtained a Charger V7 Automatic. The reservoir is empty and the tranny has no fluid present. There is some residual, so no corrosion appears to be present and the wheels turn freely.  I would appreciate input on fluid to use (I believe the manual recommended Wheel Horse #8827 or Texaco Transhydral).  Thanks.
×
×
  • Create New...