C-175 Plow rod for down pressure

[amard58 0]

I understand there is a way to get down pressure on my blade by replacing the chain link with a straight 'piece'. Is there a part number for this piece or is it something that gets fabricated?

Does anyone have what I need and willing to sell, or can someone provide a photo of the part with the dimensions so I can get one fabricated?

Thanks in advance.

[can whlvr 993]

if noone has a pic handy i will try and get one tommrow,its a flat bar,at least 5/16 thick,about 1 inch wide,and about 12 inches long with a pin at each end,one to go to the bell crank and the other to the blade,its very simple and can be made with a bar and some bolts,i think the space between the pins is 11 1/2 inches

[Hodge71 664]

:text-yeahthat:

[SgtBob 27]

Here are a couple photos of what you need. 1/4 " thick, 12 1/2" overall length, 1 1/4" inch wide, with a pin at each end ( pins are 11 1/2 " apart center to center). Please let me know if you have any other questions.