WHX?? 48,815 #1926 Posted May 31, 2020 After Dan pulled the cores we had a 1/2" ... this trailer has got a trim cover around the torsion spring Ritchie that is what screwed us. Taking that off would have gained us another 1 1/2". I had it off several times to straighten out cables. Should just leave it off but how many times do we wrangle with a cab?? 3 1 Share this post Link to post Share on other sites
19richie66 17,508 #1927 Posted May 31, 2020 Yeah I have no cover over my barrel/spring assembly. I would bust my gourd on it every time I went in if I did. I have enough room to walk in straight up but I duck anyways. I hit my head on enough stuff as it is. 1 5 Share this post Link to post Share on other sites
Pullstart 62,887 #1928 Posted May 31, 2020 @19richie66 ... Here’s a Corona Free hug from a couple years back! I’ve got the short guy advantage right here... barely ever hit my head on stuff! 7 Share this post Link to post Share on other sites
rjg854 11,362 #1929 Posted June 7, 2020 More pics to follow, just a hint on the new aquire..... a bit of horse wranglin across the border. 7 Share this post Link to post Share on other sites
rjg854 11,362 #1930 Posted June 7, 2020 As promised this is what I made a trip to PA for 9 6 Share this post Link to post Share on other sites
ebinmaine 67,507 #1931 Posted June 7, 2020 16 minutes ago, rjg854 said: this is A right nice lookin ride... 1 1 Share this post Link to post Share on other sites
rjg854 11,362 #1932 Posted June 7, 2020 Thanks to @Mike'sHorseBarn tractor runs and drives nice, a few things that need a little TLC, but that's the fun of buying another tractor, something to tinker with. Deck came from WheelHorsePlethora, the same guy that's putting on the swap meet at the same dates the Show would have been. 2 Share this post Link to post Share on other sites
rjg854 11,362 #1933 Posted June 7, 2020 7 minutes ago, ebinmaine said: A right nice lookin ride... looks to be pretty much original, he had the seat redone, and I can see some new ignition parts, starts right up with a turn of the key. I'll be checking it out a little closer today. All in all a fine tractor. 2 Share this post Link to post Share on other sites
Pullstart 62,887 #1934 Posted June 7, 2020 2 hours ago, rjg854 said: Thanks to @Mike'sHorseBarn tractor runs and drives nice, a few things that need a little TLC, but that's the fun of buying another tractor, something to tinker with. Deck came from WheelHorsePlethora, the same guy that's putting on the swap meet at the same dates the Show would have been. huh? What? Where? Share this post Link to post Share on other sites
Achto 27,577 #1935 Posted June 7, 2020 3 hours ago, pullstart said: huh? What? Where? 1 2 Share this post Link to post Share on other sites
rjg854 11,362 #1936 Posted June 7, 2020 He also had a business called Dave's Tractor World a few years ago . Share this post Link to post Share on other sites
WHX?? 48,815 #1937 Posted June 8, 2020 Now Dan you know better...don't give him any ideas... 2 Share this post Link to post Share on other sites
echris 1,425 #1938 Posted June 16, 2020 "What's in your mirror?" Stick with me for a minute here. Back in the day, my Father-in-law and I would build/repair decks and docks and boats and whatever at his Massachusetts lakehouse. EVERY SINGLE TIME we would tow the boat down the road to the launch, he would say, "Somebody's following us. And they're really close!" LMAO In the later years, the rear end collision warning system on his newer Suburban told us so. I miss those days. 1 4 Share this post Link to post Share on other sites
D_Mac 8,619 #1939 Posted June 16, 2020 (edited) Just got it home 30 mins ago !!! and no where to put it !! Edited June 16, 2020 by D_Mac 8 3 Share this post Link to post Share on other sites
Pullstart 62,887 #1940 Posted June 17, 2020 13 hours ago, D_Mac said: Just got it home 30 mins ago !!! and no where to put it !! got your truck back? With a tractor to boot! 1 3 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #1941 Posted June 20, 2020 result of a multi state wrangle! Share this post Link to post Share on other sites
ebinmaine 67,507 #1942 Posted June 20, 2020 10 minutes ago, PeacemakerJack said: result of a multi state wrangle! Izzatt an FEL? Share this post Link to post Share on other sites
PeacemakerJack 10,738 #1943 Posted June 20, 2020 I have officially joined the FEL club! Thanks to Papa Jim @WHX24 putting me on the trail of this one and hooking me up with @Shynon who had the info. Thanks Tom for staying on me about picking this up It is a very clean two owner attachment that came with everything to plug and play. kellis big D is going to get a Loader for yard work! 10 Share this post Link to post Share on other sites
953 nut 55,237 #1944 Posted June 20, 2020 4 hours ago, PeacemakerJack said: I have officially joined the FEL club! Thanks to Papa Jim @WHX24 putting me on the trail of this one and hooking me up with @Shynon who had the info. Thanks Tom for staying on me about picking this up It is a very clean two owner attachment that came with everything to plug and play. kellis big D is going to get a Loader for yard work! She and the kids will have fun finding things that NEED to be dug up and moved. Doubt that you will ever get a chance to use the loader yourself. 1 5 Share this post Link to post Share on other sites
ebinmaine 67,507 #1945 Posted June 20, 2020 15 minutes ago, 953 nut said: Doubt that you will ever get a chance to use the ******* yourself It happens. I once had a mid mount grader long long ago. Barely even drove a few feet with it on. Then.... Trina has one........... 5 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #1946 Posted June 20, 2020 One of the nice things with the loader is, if she will let me teach her, Kelli will be able to move a variety of things by herself that she otherwise couldn’t or wouldn’t. I love the fact that it is for her tractor and so she is already comfortable with that machine. It is all about learning the controls for the Bucket. As much as I like new toys, if the kids and wife can safely and comfortably use a machine like that to accomplish yard projects—I’ll let them have all the seat time they want 5 1 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,561 #1947 Posted June 23, 2020 (edited) A little better view: Edited June 23, 2020 by SylvanLakeWH 7 2 Share this post Link to post Share on other sites
WHX?? 48,815 #1950 Posted June 24, 2020 Thought I told Mr. Ed. To chase them guys home! 1 3 Share this post Link to post Share on other sites
