19richie66 17,500 #1851 Posted April 26, 2020 19 minutes ago, SylvanLakeWH said: Nice score! So...finally figured out how you do it - you left your magic "tractor finding" wand laying on the back seat?... Nice colors on the wand - but they kinda clash with your bandana... that’s his unicorn brush. 1 4 Share this post Link to post Share on other sites
Pullstart 62,834 #1852 Posted April 26, 2020 You know I saw that in the picture and thought “they know I have kids, it’ll pass!” i guess not The machine might have come with a few extras... 1 3 Share this post Link to post Share on other sites
Pullstart 62,834 #1853 Posted April 26, 2020 Here are some spread out pics, before I loaded. The pepper pot muffler came with the tractor, not the black one. There’s quite a bit in that truck! The heavy frames have me thinking about the possibility of starting the dump truck frame over, with heavier stock. I’m up in the air about using one of these grill shells on the dump truck too. One of these spare front axles will add some beef to the rolling stock as well... if they are not incorporated into a draft horse plow machine. 3 5 Share this post Link to post Share on other sites
19richie66 17,500 #1854 Posted April 26, 2020 Someone liked...... or disliked 69’s. What a haul Kevin...... for a friends kid 2 1 Share this post Link to post Share on other sites
Pullstart 62,834 #1855 Posted April 26, 2020 The complete tractor is for them anyway Richie! 2 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #1856 Posted April 26, 2020 Ok so I didn't get the pics while on the trailer but here it is parked in front the "red tractor shed" ... A 1 owner '86-7. 414-8 (with a broken rod?) And I have a good running 12 to put in it's place... @gwest_ca can you help me with the serial/ model numbers thanks in advance. 3 1 Share this post Link to post Share on other sites
953 nut 55,189 #1857 Posted April 26, 2020 9 hours ago, 19richie66 said: I wish I got paid royalties on these photos.... I’d be wealthy by now I'm sure the check has been temporarily lost in the post office, sooner or later it will show up probably much later! Empty back seat, Kevin, you are slipping! 2 Share this post Link to post Share on other sites
Pullstart 62,834 #1858 Posted April 27, 2020 1 hour ago, 953 nut said: I'm sure the check has been temporarily lost in the post office, sooner or later it will show up probably much later! Empty back seat, Kevin, you are slipping! The hood was on the floor at least I didn’t want it flying off! 1 Share this post Link to post Share on other sites
Andy N. 2,142 #1859 Posted April 27, 2020 Rescued this '89 312-8 with short chute snowblower today. Luckily when they painted it maroon metallic, they didn't paint over the ID tag. 4 1 Share this post Link to post Share on other sites
D_Mac 8,607 #1860 Posted May 2, 2020 (edited) Well Its official I am the proud owner of this ! Going to need alot of help with this guys. Gonna start a new topic for it soon. It is a 1964 Lambert 655 but built by Farm-Ette. Needs a lot of help. I dont know where to start. Right now I cant even get it off my truck as there is no tie-rod on front wheels and the rears are locked up. Please keep an eye open for a post in the " other brands" section for better pics and see if we can get it rolling again . Thanks in advance. Edited May 2, 2020 by D_Mac 5 4 Share this post Link to post Share on other sites
ebinmaine 67,424 #1861 Posted May 2, 2020 9 hours ago, D_Mac said: Well Its official I am the proud owner of this ! Going to need alot of help with this guys. Gonna start a new topic for it soon. It is a 1964 Lambert 655 but built by Farm-Ette. Needs a lot of help. I dont know where to start. Right now I cant even get it off my truck as there is no tie-rod on front wheels and the rears are locked up. Please keep an eye open for a post in the " other brands" section for better pics and see if we can get it rolling again . Thanks in advance. That is way past super cool. Love the fenders... Won't be able to help much but I'll be looking forward to seeing the progress!! Share this post Link to post Share on other sites
953 nut 55,189 #1862 Posted May 2, 2020 10 hours ago, D_Mac said: the rears are locked up Sounds like a good place to start. Don't know anything about this brand but a bolt is a bolt and we can help you figure it out. 1 Share this post Link to post Share on other sites
rjg854 11,360 #1863 Posted May 2, 2020 Dug this out of a hedgerow today, took a battery, gas, oil and carb cleaner along with me, and lo and behold, with a little coaxing and a few shots of the carb cleaner it came to life. Course the mouse wasn't all that pleased about me cranking the engine over. Got it home, pumped up the tires, they seem to hold air for now anyways, cleaned out the mouse nest, ran it some more so I could adjust the carb. It seems to run better, so there's the start of going through the tractor and giving it some much needed TLC. The hydraulic lift works fine and I see no leaks, even the axle seals are good. I think this will just get a nice buff and and oil down, real nice surviver. 2 6 3 Share this post Link to post Share on other sites
ebinmaine 67,424 #1864 Posted May 2, 2020 35 minutes ago, rjg854 said: Dug this out of a hedgerow Wonderful save!!! Share this post Link to post Share on other sites
squonk 41,068 #1865 Posted May 3, 2020 13 hours ago, rjg854 said: Dug this out of a hedgerow today, took a battery, gas, oil and carb cleaner along with me, and lo and behold, with a little coaxing and a few shots of the carb cleaner it came to life. Course the mouse wasn't all that pleased about me cranking the engine over. Got it home, pumped up the tires, they seem to hold air for now anyways, cleaned out the mouse nest, ran it some more so I could adjust the carb. It seems to run better, so there's the start of going through the tractor and giving it some much needed TLC. The hydraulic lift works fine and I see no leaks, even the axle seals are good. I think this will just get a nice buff and and oil down, real nice surviver. AND YOU GOT HOME BEFORE DARK!! BONUS!!!!! 1 Share this post Link to post Share on other sites
jackhammer 546 #1866 Posted May 3, 2020 Im surprised you didn't see this one Mike, rjg854 - nice find.. Decent shape. 1 Share this post Link to post Share on other sites
WHX?? 48,814 #1867 Posted May 3, 2020 Real nice score Randy.. for saving.. @D_Mac keep us posted on that one! 1 1 Share this post Link to post Share on other sites
Super-C 4 me 612 #1868 Posted May 4, 2020 Scored a couple 953"s this weekend Got the one with the grill running on Sunday 3 5 1 Share this post Link to post Share on other sites
19richie66 17,500 #1869 Posted May 4, 2020 Nice score my friend! 1 1 Share this post Link to post Share on other sites
PeacemakerJack 10,738 #1870 Posted May 4, 2020 1 hour ago, Super-C 4 me said: Scored a couple 953"s this weekend Got the one with the grill running on Sunday I love to see these Big Wheels rescued and brought back to life before they end up destroyed by someone uniformed about their usefulness, durability, and uniqueness. 1 Share this post Link to post Share on other sites
953 nut 55,189 #1871 Posted May 4, 2020 1 hour ago, Super-C 4 me said: Scored a couple 953"s this weekend I never knew there were so many 953s out there. A few years ago they never showed up and noy it seem everyone is finding them in herds. Keep those "Big Wheels" turning! 2 Share this post Link to post Share on other sites
Super-C 4 me 612 #1872 Posted May 4, 2020 On 4/26/2020 at 12:31 PM, pullstart said: Here are some spread out pics, before I loaded. The pepper pot muffler came with the tractor, not the black one. There’s quite a bit in that truck! The heavy frames have me thinking about the possibility of starting the dump truck frame over, with heavier stock. I’m up in the air about using one of these grill shells on the dump truck too. One of these spare front axles will add some beef to the rolling stock as well... if they are not incorporated into a draft horse plow machine. Nice score on the inside weights 1 Share this post Link to post Share on other sites
Pullstart 62,834 #1873 Posted May 4, 2020 1 hour ago, Super-C 4 me said: Scored a couple 953"s this weekend Got the one with the grill running on Sunday Nice score! What’s up with wheels colors on these old finds? Rebel has a funky color set of wheels like the grilled one too. The grille and PTO bell are that color as well. 1 Share this post Link to post Share on other sites
19richie66 17,500 #1874 Posted May 4, 2020 So are the ones on my 953. 1 Share this post Link to post Share on other sites
Pullstart 62,834 #1875 Posted May 7, 2020 Has anyone broken down a tire to see the inside colors on these funky wheels? Share this post Link to post Share on other sites
