Need Parts List and/or manual for 60 inch 520 deck please

[stevebo-(Moderator) 8,330]

All-

I need to replace the center spindle and pulley on my 520's 60 inch deck. If you have either part or a manual so I can locate these parted that would be great. Thanks!

[rmaynard 15,431]

Do you have a model number? What year is the 520?

[stevebo-(Moderator) 8,330]

Bob,

The deck is off one of the newer 520's with the rollers on the front and not the skid plates. I think it is around 95/96??

The model number for this deck is 78390

[rmaynard 15,431]

I found the parts diagram at Toro. Spindle housing is a 113516. Pulley is 113054.

https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro&lang=us_en

[stevebo-(Moderator) 8,330]

Thanks Bob. Based on serial number it is a 1994 deck. I just bought a double pulley off ebay for 35 with shipping. I need to figure out if I need the spindle or that tube thing... i will have to take another look at it. Wow these parts are pricey...

[a66gt40 1]

I was hoping someone could help me out with the size and dimensions of the center spindle deck pulley? Part number is 113054. It's off of a 520-HC 60" deck. I'm not sure about the serial number on the deck. I do know that it's the one with the sleds on the front and I'm thinking that it's the original deck on the mower. I bought the mower last year to restore but I can't find the pulley anywhere nor the dimensions. I have been restoring these mowers just about all winter and have bunch but this is the only commercial grade that I have found as of yet. Please help. I have a seller on ebay who may have one that will work but I don't have the measurements. Thanks in advance.