Jump to content
Sign in to follow this  
tarcoleo

Generation

Recommended Posts

tarcoleo

Generation

My Dad and I met mostly in the “here and nowâ€. I didn’t

know the man before I was born, in his younger days. Dad,

when I knew him, talked mostly about events from his past.

My future, unknown, yet to be discovered, could not be discussed

in any depth, only speculated. But it was mine, to be shaped

by me, and was of great interest--mostly to me. In comparison

to my father’s past, all I could offer was a little grist for a gruel

of passions we shared.

So now I am dealing with the same hiatus, but on the

other end. There’s not much I can offer constructively

to my children and grandchildren that is seen as useful, much

less interesting. My dated references and limited knowledge of the

contemporary are two reasons for the gap. Not to be unhappy--

I have now gone back to being a student and the business of

learning-- still with the hope of occasionally contributing to the

lesson. Its a big classroom.

  • Like 3

Share this post


Link to post
Share on other sites
 
AMC RULES

Deep kimchi right there, but I think I'm reading that you are truly blessed to be where you are right now...

in the "here and now." :)

Share this post


Link to post
Share on other sites
 
Steve B.

I agree that classroom is quite big... and the lessons unending.

I have read that you are at 30 who your father was when you were 10. I seem to channel my father more and more.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • Donavon1
      By Donavon1
      Project black Betty the diesel 1054
    • BrianStasC-101
      By BrianStasC-101
      Hello all. I am looking for suggestions on adapting the pto from my C series tractor to a harbor freight predator 420 13hp engine. I know the predator motors are a controversial topic however it is the route I have chosen for this particular machine. The intent was to mostly use it for plowing so no PTO required but it would be handy to have. Looking to hear from someone that has successfully done the swap that may offer any advice before I attempt to transfer it over. Just looking for any general pointers that will help me along the way to make it go as smoothly as possible. 
    • FAST41
      By FAST41
      I am new to this group. I have my sons collection of Wheel Horse tractors that are definitely rare models. He still has one to pick up that’s dual wheel and was purchased from Peabody Coal Co. This is the perfect site to get involved with. The best advice comes from folks that are hands on.. had to be their own machine shop. Nothing compares to the knowledge in this group.! But my first topic is this 19hp Craftsman INDY 500 limited edition model. I was reading a topic on here about the 18hp and 20hp models, but cannot find a single replica of this tractor on ANY site or e-bay. We live near central Ohio, so I’m assuming it’s a regional release.The Briggs engine lobes like a medium cam in a V8. We thought it was an intermittent miss, but it’s not missing a bit. The engine is the strongest riding tractor I’ve ever operated. It will literally cook the deck belt in high grass before dragging the engine down. Very wide and lower to the ground. I never got the size, but the rearend is all tires.! Looks like a dragster from behind.. almost  gives the appearance of shortened axle tubes in a hot rod. Just wondering if anybodys ever seen this particular model. My next top is will be about the C160 total hydraulic Wheel Horse he just acquired. Claim they were specially made for snow removal.







    • Wendell
      By Wendell
      New to the forum, but not to Wheel Horse. I just bought a 314-8 on the gear shift pattern there is what Toro calls a spring shift control, my 312-8 doesn't have this The 314 is a 1999, what was the purpose for this. Thanks.
    • Bobbi Barroso
      By Bobbi Barroso
      Missing lift rod. Anyone know where to buy one or the dimensions to make one?
×
×
  • Create New...