will a hydraulic tranny from a C-160 work in my for my B-100

[608KEB 795]

The case on my 1974 B-100 has a crack or hole in it. It has JB weld or something like it on the inside. I figured this out when I went to change the fluid and no oil came out. I'm not sure but I have a 1973-74 C-160 that I was going to use for parts. The transmissions look the same with the exception of the hydraulic hoses going to the ram or lift. KB

[Kelly 1,029]

Yes it will bolt right in, the B uses 1" axles the C will have 1 1/8" axles, you can add hyd. lift to the B by swaping all the parts, that is what I would do, or you can take it off, but you will have to remove the cone valves out of the C trans, if you go that route we can give you more details on how to remove the hyd lift.

[608KEB 795]

o.k.

[608KEB 795]

Would the rims off my b-100 bolt up to the c-160 hubs. I was going to try to restore the B-100 so I'm not sure if i want the hydraulic lift or not. I also have a 36" deck and 37" snow thrower so I dont' think lifting those is a big deal.Would the sunstrand pump off the B-100 bolt up to the c-160 tranny? KB.