Prater 75 #1 Posted March 4, 2012 If you remember I added a straight pipe to my 416-8 a few years back. I had a detailed account on RS from the adapter plate to the finished pipe. It has been too loud for me the last few times and I finally found a muffler that would fit the 2" exhaust pipe. It was a Stanley muffler made for a John Deere. JD-8 was the model. Here are a few pics of the install, I still need to get a 2" pipe clamp to finish. The only thing I am not sure about is the muffler height. I like were I have it now but I think the muffler can looks a little strange with the bottom higher than the top of the hood...let me know what you think so far. The before pics ready to remove some of the pipe I hope it works cause there no going back now New Exhaust with the Stanley Muffler Share this post Link to post Share on other sites
Wheel-N-It 2,968 #2 Posted March 4, 2012 Actually I really like it this way. It looks like a factory design. Can't go wrong with that. Share this post Link to post Share on other sites
squonk 41,018 #3 Posted March 4, 2012 Anything with a rain cap going "tink,tink,tink" looks good to me! :thumbs: Share this post Link to post Share on other sites
can whlvr 993 #4 Posted March 4, 2012 looks great,so is that a hood transplant,the title says 416 and thats a blackhood,watch those trees,i broke my elbow hitting a tree branch,lucky i didnt break the block and yes it was supported Share this post Link to post Share on other sites
gwgdog66 23 #5 Posted March 4, 2012 I like it Steve :USA: Share this post Link to post Share on other sites
Prater 75 #6 Posted March 4, 2012 Its a transplant hood. I think the steering is stronger on the blackhood. That elbow is mandrel bent header pipe from my race car parts tig welded to a 1/2 steel plate. I can swing from it... Share this post Link to post Share on other sites
Duff 206 #7 Posted March 4, 2012 That's a sharp looking set up, Steven! Nice work! Duff :thumbs: Share this post Link to post Share on other sites
bowtiebutler956 650 #8 Posted March 4, 2012 Looks great Steve! 2" exhaust? No restriction there, and I'll bet its got a loud bark even with a muffler. Matt :flags-texas: Share this post Link to post Share on other sites
tgranthamfd 29 #9 Posted March 6, 2012 Looks great Steven. Guess you finally found the right muffler. Did the #1599 belt fit on Dad's tiller ok? Share this post Link to post Share on other sites
Prater 75 #10 Posted March 6, 2012 Terry, the 1599 is for my 416-8. I burned my right hand pretty good over the weekend and have not even tried to put it on yet. Share this post Link to post Share on other sites
tgranthamfd 29 #11 Posted March 6, 2012 Oh, I see. Bummer on the burned hand. Is the ford going on the wheel horse? Share this post Link to post Share on other sites
Prater 75 #12 Posted March 6, 2012 Yes, its already on the 416. I have an isue with a safety switch though. wont start with the key, I have to jump the posts with a screw driver... Share this post Link to post Share on other sites
gwgdog66 23 #13 Posted March 7, 2012 When you get the switch fixed post a video Hey I answered the PM Share this post Link to post Share on other sites
Prater 75 #14 Posted March 7, 2012 Full Throttle Idle I think its time for a tune-up... 1 Share this post Link to post Share on other sites
tgranthamfd 29 #16 Posted March 8, 2012 Nice, sounds awesome. Share this post Link to post Share on other sites
squonk 41,018 #17 Posted March 8, 2012 Idle is the best! Tink,Tink,Tink! :thumbs: Share this post Link to post Share on other sites
