lincman 3 #1 Posted February 26, 2012 I have a '97 520H WheelHorse and when I took my winter wheels/tires off I noticed some end play in the hub assembly on both sides. Like just a 1/8" in-out. I replaced the rear seals inner and outer both sides. Still runs and drives and pulls like a beast so I don't think it is too much to worry about. Any opinions are appreciated. Thank you, this forum saved me some dealer repair costs on my previous carb issue. Share this post Link to post Share on other sites
dennist 139 #2 Posted February 26, 2012 In/out like you say should be fine. Up/down side to side is not fine. Share this post Link to post Share on other sites
lincman 3 #3 Posted February 26, 2012 That's what I thought. I just have horizontal play vertically is relatively tight. Thank you. Share this post Link to post Share on other sites
AMC RULES 37,134 #4 Posted February 26, 2012 How'd you fix your carb? :dunno: Share this post Link to post Share on other sites
lincman 3 #5 Posted February 26, 2012 I just took the top half of the carb off and put some carb cleaner and compressed air through the passages and unscrewed the main jet cap. Put it all back together, drained and cleaned the tank, changed fuel and air filters and changed plugs. Runs like a brand new Horse. Been going smoothe for about a month now. 1 Share this post Link to post Share on other sites
