Jon Steffen 1 #1 Posted February 22, 2012 does any one have a photo of one of these that hook on to the back axle and looking of demitions of the parts that are used to make it Share this post Link to post Share on other sites
Don1977 604 #2 Posted February 23, 2012 Check out this thread. The width of under rear axle attachment is 11 1/2" the snow plow frame goes on the out side. I used 3 1/2" angle and cut one leg down to 2" wide. I would have use 4" angle if I had any. Don't know thw depth of the factory unit. Share this post Link to post Share on other sites
