Wheel Horse C-160 Front Wheel Bearing size??

[RoubaixRider 52]

Hi everyone,

Was wondering if anyone knows the size of the front wheel bearings for my 1976 Wheel Horse C160

tractor. I am not near the tractor but am heading where it is next week...the front bearings are tired!

Wheels are stock 16x6.50-8 (tires).

Any help would be great, I'm guessing Grainger will have them, or my local John Deere Dealer.

All the best,

Jason

[Kelly 1,029]

3/4" ID 1 3/8" OD

[gwgdog66 23]

Toro PN 110513

Napa PN SME 704133 (I used these the last time I replaced mine)

Stens PN 215079

[RoubaixRider 52]

Thank you very much for the help Gents, I'll follow up

with you once I get them.

Best,

Jason

[gwgdog66 23]

Not a problem

[Kelly 1,029]

TSC has cheap replacments, around $3 each, just ask they will show you where they are, just remember the size, 1 3/8" x 3/4"

[RoubaixRider 52]

Hey Gents,

Went into a local Toro repair store, you know, those old shops that are loaded with

old stock...this old fellow had bags of them. Thanks again for the help, they fit perfectly.

Jason

[can whlvr 993]

good to hear,we dont have any of those old time shops anymore,it seems as the older generation of prpietors retire the young ones have only very basic parts,even at the green guys you have to order just about everything,i guess its because of the competition,they cant afford to have alot of money tied up in parts on the shelf

[gwgdog66 23]

We have one old dealer in the City left. I try to make every effort to buy parts there when I can get by there.

[nolarefugee 5]

This is the roller type sealed bearing replacement I got from NAPA.

7-04292 is their part number.

 

The inside and outside of the bearing, you can see the older one on the right.

 

 

 

 

This is the bag the roller bearing came in:

 

[rick 231]

I try to use the sealed bearings, one less place to lube! I do lube the axle shaft and inside the wheel with good grease to prevent rust. I haven't had any problems with premature wear on the bearings, yet.