Retired Wrencher 5,530 #1 Posted January 28, 2012 Hi I have seen here a few years back how to make new paint look old. I am doing the dash board all over with a used one. But Keep in mind it should look like it has been there sine day 1. I think it was a bout using a Gloss paint. I was thinking of using a flat red buy Testors. It looks real close to old paint. any info would be helpful. Gary B.... here is a pick of the set up. Share this post Link to post Share on other sites
Sparky-(Admin) 21,468 #2 Posted January 28, 2012 I thought the dash was more of a silver with black letters . Mike......... Share this post Link to post Share on other sites
AMC RULES 37,141 #3 Posted January 28, 2012 Ditto. :scratchead: Share this post Link to post Share on other sites
Retired Wrencher 5,530 #4 Posted January 28, 2012 I mean the plate and the console it self it has a amp Gauge that has to go. Gary B. Share this post Link to post Share on other sites
Retired Wrencher 5,530 #5 Posted January 29, 2012 :USA: Well look at what I found in the pile. I have been looking for something like this on E-Bay for a while. This should blend in well. I have to find some flat red to blend in with the rest. and I will be in. Trying make it look like it is 45yrs old and been that way since new. this will look good for a worker and show putter. Thanks for looking Gary B.................... Share this post Link to post Share on other sites
Sparky-(Admin) 21,468 #6 Posted January 29, 2012 Nice fine Gary. Cigarette lighter and all! Mike........... Share this post Link to post Share on other sites
