D Drain Plug

[Prater 75]

The drain plug hex socket was stripped on the D transaxle. I used an easy out to remove it but need a replacement plug, is it a standard thread or something special that I need? The threads in the transaxle are not damaged.

Thanks

[TT-(Moderator) 1,145]

It's regular pipe thread..... 1/4", I believe. :scratchead:

[Hodge71 664]

1/4 NPT is correct sir!!!

[Prater 75]

Thanks guys, thats what I thought.

[gogolito 0]

hello

i have 516 h same problem with drain plug hex

is it the same thred

thx

[groundhog47 347]

hello

i have 516 h same problem with drain plug hex

is it the same thred

thx

Hello, gogo... : :to Some one back had apost on this will see if can find it, be back. Ok go back to main page, in upper right section type in drain plug stripped, make sure it shows forums in dark area, pick search. All PM's with that topic or wording come up, unless you already found that out, good huntin' Edited February 10, 2013 by groundhog47

[stevasaurus 22,869]

It probably is the same size and thread...plugs are available at ACE Hardware, Tractor Supply Co....just make sure it is a NPT (pipe thread). Welcome to Red Square.