Vinylguy 4,674 #1 Posted January 16, 2012 These are the push valve decals that I have so far. I think this is all off them. Decal (A) is the one I do not have dimensions or a part number for. I think it was used on some of the older D Series Tractors. Hope someome can get me the correct dimensions. I have been working for the past 3 days on reorganizing my website store to make it easier to navigate. Hope to get it all done this week. Should have started long ago. Share this post Link to post Share on other sites
Martin 2,132 #2 Posted January 16, 2012 terry, i have one more for you. this is the one on my 1277. internet sux right now will try to email it to you a bit later. Share this post Link to post Share on other sites
meadowfield 2,593 #3 Posted January 16, 2012 Terry, dimensions are: 156mm x 43mm with a 25.4mm hole in the centre. I've sent you a mail. mark Share this post Link to post Share on other sites
Martin 2,132 #4 Posted January 17, 2012 didnt have time to remove the seat box from the tractor tonight to get a better pic but you can see how it looks. Share this post Link to post Share on other sites
bobert94 38 #5 Posted January 21, 2012 Terry, The dim for the push valve [A] are 6 1/8 wide 1 1/2 tall with a 1" hole part # 102850 Red with white lettering used on the 18 automatics & other early D series Share this post Link to post Share on other sites
Vinylguy 4,674 #6 Posted January 21, 2012 Thanks Bober Now if I can just find the dang file i had it in. :eusa-think: Share this post Link to post Share on other sites