I making a wheel horse c-120 hydrostatic

[wh1257 226]

Today I have the transmission of a 417 wheel horse automatic converted to my c-120 that has expired without any problems, it is fully connected, the following is an original engine back I've found the only problem is the engine on the frame to confirm under the engine oil is a stopper that protrudes from the motor and now I can not figure out places I am still affect how I can solve this problem, engine is very different in approach as the original kohlor engines normally if someone put wheel Horse this can help me with ideas

vincent

[wh1257 226]

[Sparky-(Admin) 21,398]

Very ambitious project! What motor are you putting on this tractor? I assume the stopper is an oil drain point. I see a mounting plate on the frame, why cant you just drill an access hole so the stopper is accessible.

Mike........

[wh1257 226]

Very ambitious project! What motor are you putting on this tractor? I assume the stopper is an oil drain point. I see a mounting plate on the frame, why cant you just drill an access hole so the stopper is accessible.

Mike........

the engine is a kohler 12 hp with the oil drain spacial

[wh1257 226]

today I found anoter engine for the c-120 spacial I found a engine from a c-195 its an kohler kt 19

[wh1257 226]

the new engine for the automatic project