Hodge71 664 #1 Posted January 8, 2012 Hey guys I cant find any documentation anywhere of the model hydro motor used on the D series. The pump is a Sundstrand 90-1137 but the motor has a Sundstrand number too. Whoever tore my rear apart didnt put the tag back on the motor when it was reassembled. Could somone be so kind as to give me the numbers off theirs? The hydro shop told me having these numbers will aid them on the testing/rebuild of my unit. I appreciate it Share this post Link to post Share on other sites
AMC RULES 37,134 #2 Posted January 8, 2012 Will this help? Share this post Link to post Share on other sites
Hodge71 664 #3 Posted January 8, 2012 Unfortunately no Craig, that doesnt help. I have the same info except I have mine organized into an excel spreadsheet. The number I need is right on the hydro motor on a little black and silver metal tag. It says Sundstrand. Theres 1 on the hydro pump, which I have. The numbers off the motor are what I need. I really appreciate you giving it a shot though. . Share this post Link to post Share on other sites
Sparky-(Admin) 21,405 #4 Posted January 8, 2012 That motor is NLA from TORO but the part # was 102678. I know its not a Sundstrand part # but I figured I would post it. I got the number from the TORO Master Parts page which still had the drawing for the "73" 18 auto. Mike......... Share this post Link to post Share on other sites
pfrederi 17,876 #5 Posted January 8, 2012 There are three lines of numbers on my tag. Doesn't ID what each number stands for. First line 90-1137 Second 3105464-03 Third 03-PB 28480 Share this post Link to post Share on other sites
Hodge71 664 #6 Posted January 8, 2012 Paul, those are the same numbers on my hydraulic pump. This tag is supposed to be on the lower left hand bolt of the HYDRO MOTOR on the rear. Thanks for trying though Share this post Link to post Share on other sites
Trouty56 567 #7 Posted January 8, 2012 I think there is a tag on mine. I don't get home till 6:30 or so but I'll try to get in a position where I can see it. I use bifocals so it might cramp me up a bit....like playing twister. :) Share this post Link to post Share on other sites
pfrederi 17,876 #8 Posted January 8, 2012 Paul, those are the same numbers on my hydraulic pump. This tag is supposed to be on the lower left hand bolt of the HYDRO MOTOR on the rear. Thanks for trying though I am sure the tag Iooked at came off the bad motor on my machine. (now maybe it had been swapped out at some point) I have two motors on the shelf Both have tags first second First line 90-1137 LH 90-1137 2nd Line 3102464-04 3102464-03 3rd Line TD 13963 43645 Note I made a typo or miss read the stamping on my original post 2nd line on that tag was 3102464-03 Share this post Link to post Share on other sites
pfrederi 17,876 #9 Posted January 8, 2012 This software doesn't seem to recognize spaces First tag 1st line is 90-1137 LH second line is 3102464-04 third line is TD 13963 Second Tag i 1st line is 90-1137 second line is 3102464-03 third line is 43645 Share this post Link to post Share on other sites
Trouty56 567 #10 Posted January 9, 2012 I may have misread my tag but it does have some of the same numbers as Paul's. It is attached to the bottom left bolt. Some fool painted over it.... 90-1137 3102484-0 I thought it ended here but maybe it ends with a number. I was pretty sure the 8 was between the 4's. 03-PB 19532 It is too hard for me to read....I had my bifocals and a magnifying glass. Still having trouble walking. Share this post Link to post Share on other sites
Hodge71 664 #11 Posted January 9, 2012 Thanks guys. I m going to pass the info onto Northeast Hydro once I get my pump and motor ripped off this week....Theyre saying snow friday night....this could be way too close.... Share this post Link to post Share on other sites
can whlvr 993 #12 Posted January 11, 2012 i took a copy of the sundstrand manual to my guy,but i tore it apart and they said it was handy Share this post Link to post Share on other sites
Hodge71 664 #13 Posted January 11, 2012 Hydro pump and motor are at the doctors office....lol...time will tell how much this is gonna hurt Share this post Link to post Share on other sites
pfrederi 17,876 #14 Posted January 11, 2012 Hydro pump and motor are at the doctors office....lol...time will tell how much this is gonna hurt Looking forward to your report. If it isn't unrealistically painful I may take a pump and motor there myself. Share this post Link to post Share on other sites
Hodge71 664 #15 Posted January 11, 2012 Thye are really nice people up there. I dealt with Chris and he was very upfront with me. He definitely thinks the hydro motor is on its last leg. Pump will be igured out once surgery starts. I hope it doesnt hurt too bad. I will give a breakdown when I get to that point Share this post Link to post Share on other sites
