Vinylguy 4,674 #1 Posted December 17, 2011 I need to know the correct dimensions for this push valve decal which was on an 875. Any help would be appreciated. Also I am wandering if the rear fender decal on the late 60s commandos were white or were they chrome. Thanks in advance Share this post Link to post Share on other sites
Martin 2,131 #2 Posted December 17, 2011 terry, just ran out to check, 4 1/2 inches x 1 1/2 inches....... actually the 4 1/2 is just under about 1/32 but the 1 1/2 is spot on. hope that helps..... i will try and get a pic Share this post Link to post Share on other sites
Vinylguy 4,674 #3 Posted December 17, 2011 Very much so. thank You PM me your mailing address and I will send you a Horse a holic leather key fob. Merry Christmas and happy new year. Share this post Link to post Share on other sites
Martin 2,131 #4 Posted December 17, 2011 angle of the pic makes it look about 4 3/16 but square on its closer to 4 7/32 Share this post Link to post Share on other sites
smoreau 658 #5 Posted December 17, 2011 :woohoo: that's the one decal that I am missing. Terry your the best!! I will be in for one for sure! Now Martin needs to get his boys 875 looking like mine for the MI show :ychain: Share this post Link to post Share on other sites
Wheelamatic 2 #6 Posted December 18, 2011 Terry I replied to your e-mail about this sticker last night (got home late) man are you in for a good laugh when you see my measurements You will be able to blueprint your decal to the .001 if you can make heads or tales of it. LOL Dwayne Share this post Link to post Share on other sites
